Poulan "Poulan" Push Mower Logo

Related Topics:

Posted on Jun 27, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Serial # 021309M 018532\r\nP0550N22SM 961120080 80 The outter housing that holds the engine down is broken, need 22 inch blade and a shaft. Where can I get these to purchase? Also need the housing.

1 Answer

dannydoesita

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Master 778 Answers
  • Posted on Jun 30, 2011
dannydoesita
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: May 03, 2011
Answers
778
Questions
3
Helped
226777
Points
6375

If your looking to purchase new parts , you my find this to be a very expensive purchase. You can go to your local dealer and get an idea of price for the parts you need or you may go another route. My suggestion would be to go to your local automotive junk yard and look around there. People throw away everything. You will probably find exactly what you want and for just a few dollars. Give it a shot , you have nothing to lose. GOOD LUCK.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How is the mandrel shaft assembly removed from a broken housing and replaced into a new housing? Are there any shop diagrams I can look at?

Use a wood block to hold the blade back while removing the top bolt. then remove the blade. finally knock the shaft out from the top, should free up with a slight hit on the grease fitting and come out through the bottom. Goes back in the same way.
0helpful
1answer

Honda lawnmower blade broken at shaft

How To Remove Lawnmower Blade Adapter

If it's the blade that is broken, remove the two bolts that hold the blade onto the blade adapter. If the blade adapter is broken, it needs to be taken off the engine shaft. The Link shows a video on how to remove a blade adapter. Hope this helps......
May 01, 2014 • Garden
0helpful
1answer

I have a Sears 22 inch lawn mower, model #917.376070, Serial number 121906M-029886. I recently purchased and installed a new blade from the Sears parts store in Milwaukee (part no. 917-141114) and...

The blade only cuts on the outer 4 inches of the blade rotation(diameter). As the mower moves forward, it cuts the full width of the deck. If sprigs of grass are missed or excessive vibration is present, you may have a bent crankshaft. Check and be careful, ejection of the blade hazard exist.
0helpful
2answers

The mower is not cutting even. we changed the blades and leveled the deck but can not seem to fix the problem

Everything sounds and looks good but the cut is uneven. I would think the only possibilities are a freewheeling blade, or an upside down blade. Neither situation is rare. If neither of those is possible I think I would set the whole thing up on jack stands and make sure nothing is going akilter in the mechanism which raises and lowers the deck, one side could be hung up.
1helpful
1answer

Engine won't start and backfires

Did you loosen the coil when you changed the key? Check the setting between the flywheel and the coil. !0,000ths, I think.
6helpful
1answer

Furnace blower motor vibration

Check for a loose set screw on the motor shaft for the blower wheel.
Check the blower wheel for a missing balance weight.
Check the blower wheel for a dust buildup in the blades.
Check the blower wheel for a broken fin blade.
Check the blower motor shaft for excessive play.(more than 1/4 inch of play).
Check mounting screws on the blower housing.
0helpful
2answers

How do I disengage the drive shafts to tighten a

should be a black button between the handle and the guard. Spin the blade until it depresses all the way down and you should be able to loosen the blade.
1helpful
2answers

Oil leak tecumseh engine OVRM120-22053F

oil seal is worn out from durbis wrapped around crankshaft need to replace oil seal by removing blade and hub
clean cranksaft with fine sand paper
a sharp awl punch in the outter edge corner of seal on a 45 degee angle then slide seal off

heres the manual.pdf page 75
7helpful
2answers

Blade replacement on mk-170 tile saw.

take a pair of good vise grips and hook onto blade tightly, slide uo against back braket. that will hold the blade from spinning while you remove the nut, try bumping your ratchet/ wrench w/ a rubber mallet or hammer. hope this helps
1helpful
1answer

Blade is loose

on the inner part of the motor [fan side] look for an external snap ring and a fiber spacer. the armature fits all the way into the rear part of the housing, the other housing goes over the motor shaft and must press against the snap ring and fiber washer.
Not finding what you are looking for?

120 views

Ask a Question

Usually answered in minutes!

Top Poulan Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Are you a Poulan Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...