I need a new burner for my Broilking 531/33GBC and the grid the coals rest on. Pity all the new BQs are all just tin.

Paul is correct, but also check the air ajustment for the burners. If you have real large yellow flame the shutter should be opened till you get a blue flame.

Just answered this same question on your other post

Try Calgary BBQ Center they are on line

turn off tank open burners run off gas , turn off burners turn on tank very slow then try burners , if not then they should be cleaned out and check orffices see if they are blocked .

BroilKing, for whatever reason, doesn't sell parts directly to the consumer. They would like for you to return to the dealer you purchased it from, for parts. However, there is another company that stocks hundreds of parts for juts abut all makes and model grills. In fact, I've purchased parts from them, successfully. Appliance Factory Parts should be able to help you.

http://www.appliancefactoryparts.com/gasgrillparts/brands/broil-king/broil-king-handles.html

Happy Grilling!!

It may be a case, that the burner orifice for that burner is clogged with shipping debris or something similar. Remove the third burner and inspect the orifice for foreign debris. Also, check the venturi valve on the end of the burner for clogs. Onward Manufacturing, the company that makes Broil King grills is a good company and stands by their product. If you continue to have a problem with the grill contact their Customer Support Hot-line 800-265-2150.

Hope this helps you to troubleshoot and solve the problem. Please let me know and Happy Grilling

Hello, The model number that you gave is relatively simple to change the burners.

1. Remove the 3 cooking grids
2. Remove the 3 vaporizer tents
3. Between each burner is a "pal nut" that just pushes on and will likely be destroyed when you remove it. They run a couple bucks each at Sears, part # 7000132
4. This will release the carry over tube holding the burners down and the burners can be lifted out.
5. Ensure that you clean out the carry over tube when you reassemble. This carries the flame from the first burner across to each of the rest of the burners when lighting them.
6. Reassemble in the reverse order ensuring that you put the burner tubes over the burner valve tubes when reassembling.

You can find a parts listing with the parts numbers at: http://www.charbroil.com/Parts/80/Performance-Series.aspx

If this was helpful, please vote yes. Thank You!!

http://www.broilmaster.com/BROILMASTER/pdf/Owners_Manual_Superb_by_Broilmaster.pdf

Found out from own sources and inginutity dont need premium rate for one ?
sorry bye

Please terminate my membership