Kenmore Elite Oasis 27052 Top Load Washer Logo
Posted on Jun 25, 2011

My Kenmore Elite Oasis washing machine has error code "UL" while in rising cycle and stop. Can you tell me what is the problem and how to solve it.

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Jul 11, 2011
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Jul 11, 2011
Answers
1
Questions
0
Helped
2474
Points
5

My Kenmore Elite Oasis washing machine will drain but not spin and it keeps jumping back and forth to different time cycles. It continually reads "UL" and I keep trying to adjust and balance the load but it does not help.

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Sep 17, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 17, 2012
Answers
1
Questions
0
Helped
2474
Points
1

Kenmore oasis 110.2708 have juice but no light on panel, push power button nothing, inlet you pull out the door switch, the light will turn on with [DL} or [DU] but if you touch hole any button for 3second to diagnostic all the lght will go off no power at all, is that could be a door lock switch?
please help

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Kenmore elite oasis washer will fill with water and skip the wash cycle. It will spin and empty then turn off. we have seen the code UL what can be done to fix this?

UL=Ultra Level of water?
usually its just foam in sensor tube,as prior using too much or wrong type of detergent(for hand wash,or else). Do few cycles with just and only water,or open machine and blow tubes to level "sensor".
1helpful
1answer

Kenmore Elite Oasis washer does not lock

First, OL/UL stands for "Overload", so in other words, the washer things the tub is too hard to move because it's overloaded and the motor is struggling or the unit is way out of balance causing the washer to struggle. The most common problem is a nut below the inner tub that needs to "float". Floating is when the tub fills up with water to a certain level the inner basket will rise about 1 inch from the center agitator. What this does is disengage the basket from the motor so that the agitator can rotate independently from the basket. If the basket does not float then when it tries to agitate the whole basket will turn back and forth at the same speed as the agitator and this will cause the OL/UL error code.
0helpful
1answer
1helpful
3answers

How do you solve the balance problem in the kenmore elite oasis even with no clothes it in

Try running with no clothes? If still shows UL when empty running, your machine needs service. P.S. use HE detergent or else.
7helpful
2answers

My Kenmore Elite Oasis washer unbalanced signal seems to be very sensitive. Only after several tries of readjusting the load to get it really even that the washer will spin without stopping. I made sure...

If the washer throws an UL error code with out any clothes in the washer then the issue must be concerned with the mechanical alignment inside the machine or a bad CCU.

The most common problem which can cause this is some sort of mechanical hinderance which does not allow the basket to move freely.

The suspension system which holds the basket in its place might be faulty and causing the unbalancing. In this model i think there are plastic ring at the bottom of the basket . Even if they are worn out or moved out of position it may cause the UL error code you are facing
0helpful
1answer

My Kenmore Elite Oasis starting to show "UL" and immediately stopped working. How do I fix this issue?

UL = Unbalanced Load

re-distribute the clothes and re-try.



Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
2helpful
2answers

What does UL code mean on washer?

What does error code UL mean on digital Kenmore Washer?
1helpful
4answers

Constantly off balance

I have a kenmore elite oasis top loading washer about 3 years old. I took it apart and checked the springs and the rods and the plastic ends that hold the rods in place and all of them look fine. I run an empty load in the washer and it still goes unbalanced on the spin cycle. My water bill has tripled due to the fact that every load takes 3 to 4 washings. I need help please!
Not finding what you are looking for?

2,484 views

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Alexander

Level 2 Expert

171 Answers

Cindy Wells

Level 3 Expert

6688 Answers

vince

Level 3 Expert

2530 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...