"Unrecognized File Format"

Sounds like you're pulling out the card without using the "safely remove hardware" function. This corrupts the card. If your pics are safely on the computer, format the card in the camera to erase it and get it working properly again.

Did you format the card in the camera before you started to use it? You can still do that but download any pics first since formatting will erase the card.

Is the error message appearing on the caemra or the computer?

I will in both cases recommend to format the SD card and to update your firmware.

Format your SD card. NOTE this will delete all existing data on your SD card.
Do the following:

1. Insert the memory card into the camera. Make sure the card is firmly seated (push in the card until it clicks into place).
2. Turn on the camera.
3. Press the Menu button, then go to the Setup Menu.

Scroll up or down to the Format option, then press the OK button

Instructions to uploading new firmware:
Connect the camera with the computer.
Turn the camera on.
Click onto the link and follow the instructions.
http://www.kodak.com/global/mul/service/downloads/DownloadLookup.jhtml?pq-path=9637/9640&product=EKN032552

If successful please give me the feedback as a rating or recommendation. Thank You

Sounds like there is a fault in the SD card.

Try an alt. card reader and computer.

Hopefully you will have the chance to retrieve the pics. If not ;(

Once pics are transferred. The SD card needs to be formatted. Remember this will delete all data on the card.

try format the SD card. I have this problem when the camera turn off by low battery.

Honestly, try transferring the images to your computer without using the Easyshare software. This software has been causing some problems for some users. After you have the images on your computer...open them up and then save them as JPEGs. This should help fix the problem with the transferring.

hi there,
have you tried CARD RECOVERY. down load from google. it will retrive all photos ever taken on that memory card...
good luck

This error message indicates that the camera cannot read the picture format. Transfer the unreadable picture to the computer, or delete the picture.

When videos are spliced, multiple audio and video tracks are needed. Kodak EasyShare digital cameras can handle only one video and one audio track at a time. Use the Apple QuickTime player to view spliced videos.

When videos are spliced, multiple audio and video tracks are needed. Kodak EasyShare digital cameras can handle only one video and one audio track at a time. Use the Apple QuickTime player to view spliced videos.