What is sony error code 1106. On selecting the internet this error code is displayed. I have done a hard reset of the tv by removing power but this didn't work

Hi
You can try.
Part 1: Manual Factory Data Reset with TV buttons

Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in. Continue to hold the buttons down until a green LED light appears near the Sony logo on the TV front.
-----------------
How do I factory reset my Sony Bravia TV manually?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px; transform: rotateZ(-180deg);"> Factory data reset

1. Press the HOME button, then select [Settings] - [Device Preferences] - [Reset] - [Factory data reset].
2. Select [Erase everything]. If you have set a PIN code on your TV, you will be prompted to input it when you select [Erase everything].

Turn the TV on.
Behind the TV, there is a D-pad like control, hold that up (CH +) and while pressing that, push the power button.

You should see a "RESET" message in the corner of the screen.

Have you checked for firmware updates? You can try to do a hard reset which can force OS errors to clear up.

First method:

1. In order to switch off the device, hold down the Power button for a short while.
2. In the next step press and hold Volume Up + Power key at the same time for a few seconds.
3. You can release held keys when you see menu on your screen.
4. Then press Volume Down to select option "Factory Reset", and press Power button to confirm.
5. Success! The hard reset has just been performed.

Second method:

1. Turn on the device by using the Power button.
2. Afterwards go to Settings and then to Backup & Reset.
3. Tap Factory Data Reset and select Reset Device.
4. If it's necessary enter the safety code and choose Erase Everything
5. Select OK to confirm the whole operation.
6. Well done! After a while your tablet should be ready to use.

Third method:

1. At the beginning press the Power key to turn off your device.
2. Afterwards press and hold Volume Up + Power simultaneously for about 5 seconds.
3. you can release held keys when you see menu on your screen.
4. Then press Volume Down to select option "Recovery", and press Power button to confirm.
5. Press Volume Down to choose "wipe data/factory reset", and then push the Power button to confirm.
6. Select "Yes--delete all user data". Use Volume Down button to scroll and Power key to select.
7. To restart the tablet, select "reboot system now".
8. Success! The hard reset is done!

A Hard Reset will erase all of your data

Do a hard reset to this set, and check. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.

First please find your PC network settings: Step 1/ : How to check your PC network settings: Using the PC that is already networked to the same network router, please carry out the following procedure. On the PC desktop click Start then click Run now type in cmd and click OK (with Vista/ Windows 7, type Run in the search field located at the bottom left of the desktop and then open Run and type cmd) At the command prompt type ipconfig then press enter/return on the keyboard. The computer will now display setting figures which will look like but not the same as the following examples below. IP Address: 192.168.01 Subnet Mask: 255.255.255.0 Internet Gateway: 192.168.11 Now that the PC network setting figures have been located, the Sony networked product must also be checked to see if the setting figures are the same as those found on your PC. Step 2/ : How to check the Sony product network settings: Using the Remote control press Home/Menu Go to Settings Go to Network press OK Go to Network Set-up press OK Go to View Network Status press OK All the figures shown on the Sony product should match with those on your PC apart from the last 3x figures of the IP Address. The last 3x figures of the IP address sequentially differ due to each networked product having a slightly different IP address, this is normal. Depending on the outcome please see either A/ or B/ below. A/ DO MATCH : PC and Sony product setting figures DO MATCH If the PC and Sony networked product setting figures match but there are still networking issues please do not go to STEP 3 but contact Sony support. Details are listed below and titled Sony Support. B/ DO NOT MATCH : PC and Sony product setting figures DO NOT MATCH If any of the setting figures differ (apart from the IP address as explained above) then that would indicate that there was a problem during the network set up. To resolve this, both the Sony product and router will need to be Reset and the Network set up process started again. Please continue to STEP 3. Step 3/ : How to reset the Sony product and router: Reset the Sony product Using the Remote control press Home/Menu Go to Settings Go to System Settings and press OK Go to General Set-up and press OK Go to Factory Settings and press OK Restore Factory Settings and press YES Once this has been completed turn the TV off at the mains and then switch back on again. Reset the router Usually, press any reset button on the router, or switch off and on at the mains and wait for the lights on the router to settle and become constant. If it is un-clear on how to reset the router, please contact your Internet provider or router manufacturer. Once both products have been reset try the network set up again. Sony Support If there are still networking problems after checking through the procedure above, please contact Sony support with all of the information required as listed below, please call 0844 8466 555 Mon-Fri (9am to 5pm) Sony support will require the following information to help identify any problems that you may have with your network connection. · A full description of the networking problem · IP Address, Subnet Mask, Default Gateway (completed using Auto configure only) · Router make and model · Type of security used WEP or WPA · Wired (cable or Home Plug) or Wireless connection. · What actions have been carried out to help resolve the issue already

Read more: How do u fix error 1106 connecting broadband to sony bravia kdl 32ex520 (no router)? - I have a broadband that i use for my laptop. when i connect to my sony bravia i shows error 1106 and i dont use router to set up anything with router. I connected as a wired connection and cable and ip address is ok but internet connect failed and shows error 1106. Can you please help me out on this :: Ask Me Fast at http://www.askmefast.com/How_do_u_fix_error_1106_connecting_broadband_to_sony_bravia_kdl_32ex520_no_router-qna1013157.html

http://computerfixerpeople.com/sony-bravia-error-code-1106.php

http://community.sony.com/t5/Internet-TV/error-code-1106/td-p/43857

Have a read of this

Error 1106 is an indication that the Domain Name System (DNS) was unable to resolve. Follow the steps to check the Internet connection: 1. Check the Network Connection. 1. Using the supplied remote, press the Home or Menu button. 2. Select Network Setup . 3. Select View Network Status . 4. Select Check Connection . If any of the connection settings fail, verify that the TV is properly connected to an active Internet connection. Follow these steps, if the error continues to appear: 2. Unplug the TV and wait 60 seconds. 3. Power on and off all of the networking equipment, including the modem and router. 4. Allow the Networking equipment to reset after powering them of and on. Test that the connection is active by using a computer. 5. If the issue continues, wait and try viewing the content later.

Ethernet connections between the tv and the computer into one signal frequencies are not compatible signals.Ur main home computer have internet service connection go through a wire or wire less Router for a internet signal through out the house.Connect the tv internet signal through the Router.Internet signal will work fine.

Error 1106 is an indication that the Domain Name System (DNS) was unable to resolve. Follow the steps to check the Internet connection:

1. Check the Network Connection.
   1. Using the supplied remote, press the Home or Menu button.
   2. Select Network Setup .
   3. Select View Network Status .
   4. Select Check Connection .
   If any of the connection settings fail, verify that the TV is properly connected to an active Internet connection.
   Follow these steps, if the error continues to appear:
   
2. Unplug the TV and wait 60 seconds.
3. Power on and off all of the networking equipment, including the modem and router.
4. Allow the Networking equipment to reset after powering them of and on. Test that the connection is active by using a computer.
5. If the issue continues, wait and try viewing the content later.