At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Run the unit on high for a few hours and the smell will eventually go... New celdeks smell like wet nappies when fiorst used.... dont panic its normal.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You are going to have to strip the varnish off with a commercial varnish stripper. There are a few brands and the ingredients are about the same in all of them. Use very fine 200 grit sandpaper to roughen up the wood surface a bit for better adhesion. Home Depot and Lowe's have suitable products. You can ask about the types of paints and prep for use on stairs as well.
does the car have disc brakes or standard drum brakes !! if its disc brakes in the back. usually a stuck brake caliper will cause this. if it is stuck bad and can not get cup loose from caliper, replace caliper is best fix. and the smell from the back is probably the brake pads burning up. if the caliper sticks, then the pads will still be in contact with brake rotor.
That sounds like the "Porportioning valve" is defective.
You may want to go to your local library and check out a Chilton's, or some other repair manual for the "how to" to fix yourself or take it to a tech you can trust.
This sounds like a caliper hanging up and not releasing. Are you sure the calipers were replaced? I would take this back to the shop where it was done as you will quickly ruin the new pads and rotors if the calipers are not operating correctly.
If you smell burning - the caliper might not be opening properly.. Break might be sticking..
Jack it up.. The tire should spin freely..
If not - try bleedingthe lines real good..
The cellulose pads in a mastercool are glued together and usually the adhesive is what you smell. It may take a while for it to go away. Strange as it may seem, as the pads get more mineralization and you use it more the smell will go away. Do not use a cooler for your whole house without plenty of exhaust through a window or an updux. Coolers work best when there is plenty of freely moving air.
×