Screen reading memory card not initialized

Yes, you can use the XD M+2GB card in your camera. The M+ card is a faster one. The following website gives you more on it.
http://www.olympusamerica.com/cpg_section/cpg_xd.asp

"The Type M+ xD-Picture card is compatible with the Type M card in all cameras and is 1.5 times faster than the Type M card. The increase in speed may be useful in sequential shooting of digital stills and in the recording of high-density video with Olympus cameras."

Good luck.

Card not Initialized

help me i also have the same problem please email me how you fixed the problem? [email protected]

mahalo's

Hi!

The Olympus C-60 can support 16 to 512MB of xd Picture card.

I hope that helps.

Good luck and have a nice day!

try to change the mega pixel rating and see,,,,
did you format the memory card initially before using that brand new??
also see if the storage is set to memory card and not to the main memory

To RangerGuy999

Just read your problem so obviously missed your daughter's vacation but here is my answer.

The firmware update you need is available here....
http://www.fujifilmusa.com/support/ServiceSupportSoftwareContent.do?dbid=879916&prodcat=710740&sscucatid=664260

It wil give instuctions on how to do the update & the precautions you need to take.

hopefully this helps

FlashyBits

Hello

Insert your memory card into your computer's reader if you have one. If not, you can purchase a multi-format USB Memory Card reader from Amazon.com or Buy.com

2 Open up 'My Computer'. You should see it under the list of available drives.

3 Check its contents first to make sure that you have the right drive.

4 In 'My Computer', right-click on the drive and choose 'Format'.

5 Leave all the options as they are and click on 'Start'. This is a non-reversible process so make sure this is what you truly wanted to do in the first place.

6 Once the process is completed, take the memory card out and insert it into your Digital Camera or any other device. Try to browse to it to make sure it works fine now.

Try re-formatting the card.

I bought a new memory card for my finepix A330 camera When I turned on the camera after putting in the new card, the screen read "card not initialized" and won't take photos.my son is going holidays 13/9/08 could you help me please Alex Richardson

The trouble with trying to format large cards of 1Mb or 2 Mb is that in order to do so you need your original card or a card that currently WORKS. I have one of 16 Mb. Go to Fujis web help page and download the firmware fix "FinePixA340" to your PC. Run and extract the data file "FPUPDATE".Now you have to put this file onto the old card. I pasted it so it was "beside" the DCIM folder ( NOT the next one down 100_Fuji folder or it won't work). To copy and paste you may have to connect the camera to the PC or use a XD card reader/writer via a USB port. Having done that, put the card back into the camera if you used a XD writer and switch off the camera. For the next bit make sure your batteries are good or connect to a power supply. Hold down Disp/Back button and THEN turn on camera. It should have detected the new firmware data file. Follow the simple instructions-say yes and let the data file load--takes a few minutes. The camera should say the new version !.22. Now that the firmware has been updated , you can now format your NEW LARGER cards 1 or 2 MG. So take your old card out ,put the new card in and format. It worked sweet as a nut for both 1 and 2 MG. The trick is to use a card that already works,load firmware file onto this , update file onto camera, then format a larger card. Its what they don't say exactly that causes frustation. Happy formating campers