Samsung idcs 18d password

Delete the mailbox, and re-install it. Then re-record all your outgoing messages.

First prove it is not a faulty handset. Find someone elses phone that is the same model as yours and rings then plug it into your line. If that phone rings your handset is faulty. If the borrowed phone will not ring but flashes then it is programming

I would suggest the power supply in your phone system needs replacing as it is making the phone system do things it shouldnt

leave yourself another message to re activate the message tone. When you clear the new message it should reset the message wait tone

You may download the manual from Product Support

if you know your password for your phone system do this. enter programming mode by pressing transfer key, type 800 enter your password then volume up key then speaker key. go to program 601 station groups find unused station group ie 510. make this group unconditional and under members add all thr extensions you want to ring then press speaker key. then go to program 406. enter line number of line and under night mode tell it the station group number you programmed above

Contact your System Administrator or System Vendor. That is the only way to reset a password on the system.

The User guide for Samsung iDCS 18D

http://www.a1bizcom.com/files/idcs16ug.pdf

http://www.telephonesystemsdirect.com/pdfs/iDCS_Keyset_User_Guide_10_2005.pdf

here is the user manual .. usually you would dial 9 to get an outside line .. or just push one of the open line buttons. No batteries are needed it gets its power from the phone line.

got the scoop on how to change the date and time. first while handset is on hook press TRSF then dial 200 Dial 1234 the display shows enable cus prog dial 1 to enable then press TRSF To change the date and time from here out press TRSF and dial 505 the display will show : (this is an example)
old: 6010104:0047
new:WMMDDYY:HHMM
Enter the new time and date using the above format and the system will return to step 2. Verify the time and date and re enter if necessary Press TRSF to store and exit. or press SPK to store and advance to the next program.