I need the codes for IDIGITAL RM-810 Universal Remote controller
My TV is Panasonic
There is an easy way to setup this remote controllerl(RC). It called "Automatic Code Searching" which means that you don't have to even find the code. The controller will searching it for you. Just do the following steppes.
1. Turn on the "Device" to be remotely controlled, e.g. TV, VCR.
2. Point the RC right to the "Device" .
3. Press a device button on the RC represent the "Device", e.g. TV, VCR, DVD etc. You can see the indicator lid flash once.
4. Press the SET and than the POWER button on the RC. hold both buttons for 2 seconds or more, you will see the red lid on. then release both buttons simutenously. after that the indicator lid will be flashing, means the searching started.
5. Keep pointing the RC to the "Device" until it is shut down by the RC, Press any button in 1.5 second to finish the setting.
You can try the RC now. It should work. My one is working.
Hi Jia thanks a lot for your automatic code searching tip. It worked for my Cybertec RM 969E remote control and now able to use it to my Toshiba Regza TV. I spent 2 hours searching for the code since I lost the manual for the Cybertec RC until I came across your tip. I saved it for future use. Excellent and very helpful tip!
Hi, thanks for your tip, it does the search on my TV till it's shut down, then I press any key but nothing happens at all, no idea what else to do, my TV is Dick Smith, any suggestion?
×
The manufacturer's website is www.chunghop.com/en
The RM-810 Remote is listed under combination remotes, easy to find if you look. There is a Zip file of the original documentation you can download, or if you look for the link on the main page it gives you directions on ow to program your remote.
It may take some time to understand, but its in chinese or korean or something, so have a little patience.
Have had this remote for a few years. It is very good, except make sure you dont press the set button by accident when pointing it at the tv. You may risk un-programming the remote and have to go looking all over again for the codes.
I hope this is helpful, and good luck with it!!!
The instructions were in the packaging for me, Anyway direct link for the documentation (that are as images) is http://www.chunghop.com/pics/shuom_2008519164535.zip (thanks to venus_angel for the origional post reply)
The site seems to be down, can someone please email me the manual?
johno69 [@] gmail.com
My suggestions are take the remote back. I've traded mine in 3 times and tried it on all 6 tvs and 6 dvd players and 3 cd players and it doesn't work.
I have a changhong lcd tv and i dont have the code for my remote rm-810
Hi i have purchased a IDIGITAL RM-810 Universal remote control, but it has not directions to us, i have tried to go on manufacturers website www.chunghop.com/en but i get the message: Internet Explorer cannot display the webpage. What can i do?
According to the instructions that come with it the codes for Panasonic TV's is 1209 or 1292
I need some code for a GVA TV
I need the code for a sanyo tv
From booklet Panasonic try 001, 003, 019, 037, 040, 106, 110, 111, 112, 114, 190 (worked for me)' 212 & 241 - Hope this helps LEN
18,639 views
Usually answered in minutes!
I need the code for a panasonic TV with the rm-810 remote.
i need code for rm-810
I need codes for panasonic tv using a GE universal remote
Manual ante rm 309 es tv remote control
Manual ante rm 309 es tv remote control
link to manual download with codes:
files.remotecentral.com/view/176-344-1/chunghop_rm-810.html
×