I lost the installation of my ir3300 and we need to install it in one of our new computer

you need to have a driver installed on each P.C
http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner_2200_2220i_2220n_2800_3300_3300i_3300e_3300en_3320i_3320n/imagerunner_3300#DriversAndSoftware
You need an ethernet network of computers
You need to set up the ip addess and subnet mask in the printer via its setup menu . At the very least a ethernet network Switch with static ip addesses for each device , or A router with DHCP server to dynamically assign ip addresses.
you need an rj45 socket on the ir3300 which it should have 802.3 ethernet 10/100 tbase ethernet according to ir3300 specs if it is missing you need a network card to be added to ir3300 by Xerox / Cannon

first of all install canon scan gear software. then in ip address fill 192.168.10.30. enjoy your ir3300 scanner with computer

I need software in connect the xerox machine to computer

Hi, please get new driver here: www.driversdown.com/
www.nodevice.com/driver/company/Canon/Printer.html
www.usa.canon.com/cusa/office/products/.../hs_1200ts

Jay kjhags

Are you possitive that your iR3300 has printer kit installed. That series of Canon copier comes with NIC installed, but the print DIMM and network firmware is an additional option that needs to be installed. If I remember correctly, there is a way to display the firmware levels...you would see iR3300n (network).

First make sure a tech's installed the Canon Network Multi-PDL Printer Kit for the IR3300 (includes network kit and BOOT-ROM).
When you press the counter check button do you see IR3300(IR2200N)? If not then you don't have the printer kit installed.
If you have the print kit installed, the print drivers can be downloaded from the Canon website. You'll need to have your copier on your network.
You could then setup a local printer using a tcp/ip port (assign your copier a static IP address) on your server and then share it on your network.

Did you buy it from a Canon dealer? If you bought a brand new one, it is unformated. You need to have it Flashed with the software to use it. Also, if you are using the copier as a printer you have to have it Flashed for printting as well..... You may have to find some one who has a lap top and works on Canons. Was the eorror code E0601?

Here are drivers for the printer - download them (click 'Get'), plug the printer in and then install the drivers.

this link should provide software for you

http://www.labtec.com/index.cfm/service/listing/EUR/EN,crid=68,crid2=1764

And then review this -- just in case

http://www.labtec.com/lang/pdf/cam_in_use.pdf

You can try searching the web for the driver for that machine or call Brother directly at 1-800-284-4357 and order another cd

John