Cartridge jammed Instruction manual for Canon Pixma MP 130

E2 = Reload the paper correctly and press [Black] or [Color]
E3 = If paper has jammed in the machine, clear the jam, reload the paper in the
machine correctly and then press [Black] or [Color].

E5 = The FINE Cartridge may not be installed properly, or the Cartridge may notbe the compatible with this machine. Install the appropriate FINE Cartridge. If lines are misaligned or the resulting output is not satisfactory, carry out the FINE Cartridge Alignment.

no both are different
Here are the list of cartridges u can use
MP210
PG-30 Pigment Black
PG-30 Pigment Black Ink Cartridge
PG-40 BLACK
CL-31 Color FINE Ink Cartridge
CL-41 Color
MP240
PG-210 Black Cartridge
CL-211XL Color Cartridge
CL-211 Color Cartridge
PG-210 XL Black Cartridge

That error is about the printhead when the printhead goes bad, you need QY6-0054-000, around $40.00, a new printhead.

it is the problem caetyridge adjust cartridge part no 40=41,830=831 or cartridge nozel is fill extra ink clean it not software open your cartridge and clean cloth

So here it goes: Open the cover as if you would change the cartridge. Then press the little black button I highlighted in the picture. Keep it pressed, push “copy” on the left and then the (print) black button on the right of the lcd. The printer will somehow work and work. Wait until it rests again. Then close the cover and press the black button again. Now it should copy… and print, and so on.

http://www.tradebit.com/filedetail.php/3901083-canon-pixma-mp780-mp-780-printer-service

Canon MP780 printer service manual

just open the front door(your printer should be power on) the cartridge carrier will come and stop in the middle, just take out the cartridge and install the new one

maybe the paper needs to be riffled(run your fingers through it before placing it in the tray)..make certain that your paper is not offset in tray, as well..

new printer drivers needed? click here

Step1
Turn the printer off and on to see if it can automatically clear some or all of the jam. Many printers provide an error-code listing on the front panel display for the area where the jam occurred. If your printer shows an error code, be sure and check the printer manual to see if that identifies the area of the printer where the jam occurred. 
Step
2
Turn off the printer. 
Step
3
Remove any paper trays. Inspect them for wrinkled or damaged paper. 
Step
4
Open any other doors that give access to the printer's paper path and to the toner or ink cartridge. 
Step
5
If necessary, remove the toner or ink cartridge. Place it in a bag or away from light to avoid damaging it. 
Step
6
If you find a piece of jammed paper, remove it by holding it with both hands and pulling firmly (see A). The goal is to keep the paper from tearing. If several pieces are jammed together, try pulling out the middle piece first to loosen the jam. 
Step
7
If the paper does tear, try rotating the roller gears manually to free the paper (see B). Don't force anything, though. 
Step
8
Replace the toner or ink cartridge and paper trays, close any doors you opened and turn the printer back on. 
Step
9
If the printer paper jam message still appears, then there is still some paper in the printer. Reinspect the paper path.

tried that and it doesn't work