What power supply do I need for a pioneer pl-x55z turntable?

$24.95

https://www.google.com/search?q=pioneer+turntable+pl-777az+head+unit+replacement

..

If your Pioneer PL 640 turntable is experiencing variations in speed, there are a few potential causes to consider. Here are some steps you can take to troubleshoot and fix the issue: Check the belt: The belt on the turntable may have become stretched or worn, which can cause variations in speed. Inspect the belt for any signs of damage or wear, and replace it if necessary. Check the platter: The platter may be dirty or have accumulated debris, which can cause it to spin unevenly. Remove the platter and clean it thoroughly, and make sure it is seated correctly on the spindle. Check the motor: The motor may be malfunctioning or dirty, which can cause variations in speed. Remove the motor and clean it, and check it for any signs of damage or wear. If necessary, replace the motor. Check the pitch control: The pitch control on the turntable may be dirty or malfunctioning, which can cause variations in speed. Clean the pitch control and make sure it is working correctly. Check the power supply: The power supply may be providing insufficient power to the turntable, which can cause variations in speed. Check the voltage output of the power supply, and make sure it is within the manufacturer's recommended range. If none of these steps resolves the issue, you may need to take your turntable to a professional repair technician for further diagnosis and repair.

That is a Pioneer Turntable, not a computer!
You need a standard 12V DC power supply with the centre pin negative or the rest of the unit it is powered with.

What you are talking about is rebuilding the power supply for the turntable. A tricky job. Can you not find a replacement transformer?
Otherwise you could find a pre-built power supply, providing it has the correct secondary supply for the turntable.

Pioneer PL X50 Manual Draw Loading Stereo Turntable Vinyl Engine Pioneer PL V70 Manual 2 Speed Belt Drive Turntable Vinyl Engine

PIONEER PL V70 SM Service Manual free download schematics eeprom repair...

Hi Javier,

How to change the belt? how to replace belt on pioneer pl x300 pioneer pl x50 turntable .



A place to find the belt. Pioneer PL A45 PL A45D Realistic LAB 1500 TURNTABLE BELT T245


Manual with schematics. Sign up and free. Pioneer PL A45 Manual 2 Speed Belt Drive Turntable Vinyl Engine

How to set it up after you put the belt on.
How to set up Turntable cartridge alignment overhang VTA VTF vibration...

Another look on how to change a belt on a turntable? How to Replace Turntable Belt on Belt Drive Turntable


It is straight forward. Patience. Fare. Well.

There are only two electrical pathways to the outside world on the back of this TT - power and signal (RCA). Which one is 'funny'?

http://media.onecall.com/Image_Products/Pioneer/PL-990_manual_EN_FR_DE_NL_IT_ES_PT_SE[1].pdf

Setup video:

http://www.blingcheese.com/video-13/turntable+set+up.htm

No you cannot play while lid is closed and YES you need an amp/receiver amp

HELLO
My advice to you would be to contact a PIONEER dealer in your area or you could try them on the web. I don't know which country you are in but I am certain that Pioneer will have a website for whatever part of the world you are in.
You could even try ebay by doing an all regions search! There may just be one waiting for you.
Best I can do for this one I'm afraid!
GOOD LUCK!