Both lights flashing and won't print. Help! - Kyocera FS-920 Laser Printer

Sounds like a bad print job stuck in a print spooler.
Turn off copier. Go around to all computers that print to it and open the print queue. delete all print jobs. reboot each PC. Power up copier and see if it clears

Possible that the switch is defective, there is fault in the line to the control unit from the switch of the control unit is faulty.
check these one by one.

How old is your cartridge,it could need to be changed.

I have rhe issue can someone help me please

Hi, First clean the printer head. You have to replace the carriage belt. It will solve your problem.

This hapens when refilled cartridges are installed in the printer. To rectify the problem, look for the 'Resume button' normally black with a red circle around an arrow head pointing towards you. With the printer powered on, press and hold this button down for about 10 seconds. The error code will usually clear and the printer will print but the orange lights will still flash.

As long as the ink is still in the original packaging, there is no expiration date.
I have (had) the same problem w/ my Canon PIXMA ip4200. Most annoying and then some! I finally cleaned the contact points on both ink cartridge and on printer w/ cotton swab lightly dipped in alcohol. Seems to be working now - time will tell for how long!

Canon Knowledge Base Replace the ink tank iP4500

Your machine needs to be serviced.
replace the cartridge with the original one.
it can not print if one cartridge is missing or not original.

First: you need both ink cartridges for the printer to function properly.

Second: You may have a bad printhead, do the following:

Clean the print head then print a demo sheet.

1. Verify that inkjet paper is loaded in the paper trays.
2. On your desktop, start the KODAK All-in-One Home Center, then select the Help [?] icon.
3. From the Help menu, select Maintenance, then select Print head Cleaning. The On/Off light flashes green during the cleaning procedure.
4. When the On/Off light glows a steady green, press Photo and Copy simultaneously to print a demo sheet.

If the Demo print is bad- IE: no black, blurry print etc., then you may need to replace the print head:
http://www.kodak.com/global/plugins/acrobat/en/service/manuals/AiOPrinters/printhead/AUR1780-9_UE_RevC.pdf

Contact Kodak:
All-in-One Printer Phone Support Live telephone support is available in English and Spanish at 1-800-421-6699, 9 A.M. to midnight, Eastern Time, 7 days a week. The expected wait time for phone support is 15 minutes.

Click on this link or copy and paste the complete link into your browser.

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

that is because ur head of ur printing cartridge is damaged.

remove ur cartridges black as well as color
n install only black cartridge n check d blinking of lights on ur printer if it doesn't blinks it's mean ur black cartridge is OK but ur blinking of light on ur printer is same it's mean ur head of black cartridge is damaged
after this process remove the black one cartridge and install the color one cartridge n check d blinking of lights on ur printer if it doesn't blinks it's mean ur color cartridge is OK but ur blinking of light on ur printer is same it's mean ur head of color cartridge is damaged
now take a dry cotton cloth n gently clean ur cartridges head install both cartridges on ur printer n check ur blinking light on ur printer that will work only if u r too lucky other wise u have to purchase a one cartridge.