At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I have panasonic 1.5 window AC model no. CW-XC-184BY.
When the problem started, the cooling started only after about 20 minutes delay and cooling was good. Now the cooling starts and stops within 1 or 2 minutes. The remote is working. What is the solution
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Isidro, If it's a window unit you will need to tilt it up from the inside. Thank you and please leave me feedback. Clean around the bottom of any debris so it can drain on the outside.
Try to check the blender control. .for cold and heater control right on passenger .or if u turn on the ac sw. The magnetic clucth working maybe some delayed and if still have the problem. .u need to clean all ac system..
11,500 Btu/h (at 115V) 10.0 energy efficiency ratio IC thermostat control allows for precise, sensitive temperature control 12-hour delay START/STOP timer lets you select start or stop time up to 12 hours in advance
Dear All,
After looking at the ads and influenced by the Reliance Digital Marketing Team unfortunately I bought 1.25 Ton Pansonic Cube AC for my House. The Model is disastrous and I am not even getting minimum cooling even though they promised that it will give 1.5 times more cooling than traditional ACs. The Air circulation is also not there even if we sit in front of the AC. When I contacted the service people from Reliance Resq and Panasonic..they are simply saying that the Air will flow straight only..in that case they asked me to fit the AC at 1 Ft height from Floor i.e parallel to my Bed. Which looks much more awkward in the Bed Room. It is better to go for Window AC than fitting this AC at 1 ft height.Air coolers available in the bazaar are better than this product. I feel that I have wasted Rs. 17000/- by investing in it. My suggestion to all of u is Better to buy a USHA Ceiling fan than buying a CUBE model
Shashidhar
I am guessing it is a window or wall unit right? not central AC? If thats the case, how old is it? New? can u return it? if not, if its older than 4 or 5 years, trash it and get a new one! If the fan isnt working after a few seconds or minutes the compressor will over heat and shut off, its not worth repairing
this can be done if your a good hand at soldering. You need to put a inlet valve in the unit so you can put freon in this is kind of a tricky job most of the time it's easier to take it to the repair shop and let them put the valve on then after that you can recharge the freon on your own..........I hope this was helpful...... : )
Had same problem with Ge AC. Unplug take out of window and remove all cover screws. Pull up on cover and pull cover off ac, Remove front cover as well there are a couple screws in the front. When looking at front of ac, hit the Styrofoam housing towards your left (towards control panel). Spin fan blade to make sure that it is clear. Plug in to double check. I put a couple quarters between the styrofoam and the metal housing, so it would not slide back. Also tape the styrofoam between the seams this helps with better cooling. Use some good tape nothing cheap. I used black duck tape. It took about 20 mins. The hardest part is re installing the AC.
×