If I understand your problem right, the installed Olympus program does not launch (start) when connecting the camera to the computer using the Olympus' USB cable.
1. For the program to start automatically, the camera must correctly being recognized by the computer. Check if this is the case! When connecting the camera to the computer, you should see information shown on the camera's display!
2. If not, try to connect the camera on another USB port, or better another computer to diagnose the problem.
3. If the camera is recognized, you can set an option in the program to autostart the program when connecting the camera to the computer.
4. If it does not help, reinstall the program.
49 views
Usually answered in minutes!
×