What is the best base for my marble tiles - Computers & Internet

Granite and Marble are the most commonly used natural stone in the interiors and exteriors of your home. When we compare Granite vs Marble, the texture, colour and appearance plays major role in determining the type of stone. Here are some differences between marble and granite, which may help you in selection process.

Granite:
1. Hard rock material, tough and more resistant to absorbs
2. You will be amazed after seeing the patterns and colors of nature (black granite kitchen worktops is best and evergreen)
3. Can be used directly after purchasing from the shop

Marble:
1. Soft rock
2. You need to lay the Marbles then polishing process will start. Initial laying process is more than granite and tiles
3. Advantage is if you feel flooring lost it's shining then you can do polishing one more time so that you will get the first look.

If you want to buy High-Quality Tiles then I like to recommend Ceramics & Beyond the leading tiles manufacturer and suppliers. Handmade Tiles Manufacturers in Delhi Hand Printed Tiles India

60 if there are no cuts.
You usually add about 10% for waste. So 66 tiles should do it.

Your fountian is not anything special as far as general waterproofing. I Think the best answer for this problem would be to cement a rubber liner down and then place ceramic tile or marble over that. It may take as much as 3 inches of mud to level it then the marble can be cemented to the mud base.
This will completely waterproof your fountain and also add value to your home. Hope this helps.

Do you know that the best marble and granite company is best company ever so if anyone who to remodel his / her kitchen or bathroom please visit this site for more info: http://www.best-gm.com.

Try a buffing wheel on a side grinder to buff it out. Did they tell you to seal the tile or the grout most tiles are presealed and only the grout needs to be sealed periodically taking care not to get on tile cause it does dull it and takes alot of elbow greese to buff out but the above suggestion should make it a little easier.

Mortar, go to a tile supply store and ask for the best tile mortar for granite.

Glue is fast and easy but pails in performance to that of mortar.

Any blade for marble will work well for travertine also.

the best filler is epoxy,your best bet is to go to a marble and granite fabricating company,they will sell you the resin and they will tint it the right color, so all you have to do is add the hardener and fill where needed,they would probably charge you 5 to 10 dollars,this would save you from buying the epoxy resin,hardener,and the green tint, most of these shops that install granite have people there that will tell you how to apply it to your tiles.good luck