Im looking for a side burner handle for a broil king soverign xl

The best advice I could offer you is to check with the manufacturer as they may offer a conversion kit themselves.

well the burners may have fell of the injectors and the gas is missing the burners try re fitting the burners back on , if not you may have a broken gas line .

you will need to change all the burner injectors and the inlet hose with a reg for tank use , I would try calgary bbq center they may have the parts you need , they are on line .

Jim, that's an extremely unusual occurrence. As the fire box or tub is made of cast aluminum. In my 15 or so years in the hearth and gas grill business, I have never heard of a case like this before.
I suggest that you contact Onward Manufacturing, the maker of Broil King Grill for their take on this.
Customer Service can be reached at 1-800-265-2150.

Thanks for choosing FixYa.

here is briol kings web site link they should be able to help you further.contact me for further help please.Thank youhttp://www.broilkingbbq.com/2010/manuals.php?action=findamanual&query=422-23

Onward Manufacturing, the company who makes Broil King grills, doesn't make a gas grill that uses coals above the burners. I have been a Broil King Dealer since 2005, I haven't seen one yet. Are you certain you have a "Broil King Grill?" As the Model Number 531/33GBC, you listed, doesn't show up in my data base for Broil King. Perhaps you have a Broilmate grill? Which is made by a different company.

Please advise. Thanks

There shouldn't be one. Unless, it was placed there for shipping purposes. Look thru the Assembly Manual closely, to see if it's referenced anywhere in it. Other than that, I would say contact Onward Manufacturing Co, the manufacturer of Broil King Grills 1-800-265-2150

I mounted them ignite side down and used channel locks to flatten the metal ears and attach the coterpin simultaneously ... worked first try

Broil King/Onward manufacturing makes a good grill. For the money, it's one of the best on the market. Consult your Owners Manual as to what the gap should be on the air intake on each burner and adjust it if necessary. Generally, for propane, it's almost wide open. But, check your Owners Manual to be sure. Or call Onward Manufacturing, who makes Broil King, If you live in North America call 800-265-2150. In Canada call 519-885-4540

Hope this helps you and Happy Grilling!

Each Venturi Pipe is held in place by the spring clip clearly visible from below (2 total). From behind, simply pull down / backwards on the clip until it pops out of the slot and hangs loose. Repeat for other pipe. Then the burner lifts out by sliding backwards / upwards.