SOURCE: my bosch exxcel 1400 washing
After checking that the pump was working freely and water was being extracted by means of the pump, I then assumed it could be one of two faults faulty brushs or motor but still as washing machines can hold a charge of electricity capable of causing a fatality after being isolated I ordered the parts required by refering to the model no. and enr no. located behind the door and requested a competent person to fit them. The parts i ordered were brushes.
SOURCE: Hi - we have a
if this unit is only two weeks old,its safe to say its under warranty ,if you can't remedy this yourself by consulting the owners manual,contact the place of purchase &/or the manufacture,i'm sure they will be glad to repair or replace the dryer.any attempt by you or any unqualified person to repair this will void your warranty.hope this helps.thanx for using fix-ya
SOURCE: hot point f-08 fault code
F08 means that the heater relay cannot be activated.
Suggest you check heater, and or thermistor (thermostat) for a fault, replace as req'd.
Please rate my solujtion.
Thanks.
1,936 views
Usually answered in minutes!
×