How do I clear the memory on my Life Fitness Blood Pressure Monitor? I have tried removing the batteries....that doesn't work.

Unfortunately there is no information on that monitor. Try removing the batteries for an hour, or even overnight.

https://www.google.com/search?q=kd533+blood+pressure+monitor+manual

..

If you have a warranty with the manufacturer then please contact the manufacturer.

error 3 on sonicator mettler ME 716

You need to transfer your past blood pressure readings to your pc or delete them to free up memory.

CVS Pharmacy stock and sells your model BP Monitor. I suspect if you either called their closest location to you or stopped in, they would be happy t make you a copy of the manual from one they have in stock.

Hope this helps you get another manual.

hold down the button on the lower right hand side. it will go through a menu of things, when it shows CL (Clear) hit button

Hold the M button until CL appears; continue to hold for 10 seconds, when released CL should "flash." While flashing hit M again and stored test data will clear.

Go back & check thoroughly that you ARE following the instructions properly & that the buttons you're pushing are actually making proper contact. (ie. you can actually hear them clicking when they make contact.?) It's the first time you've done this, so you might be making a tiny mistake, which is stopping the process working. If all else fails.... take the batteries out & leave it for a couple of hours, to let the capacitors drain. This may clear the memory for you.? Best of luck.

Make sure the unit is off

Hold down on the memory button until you see "CL" (clear)

Once you see CL appear on the screen release the memory button then tap memory once

You will hear a series of beeps

Memory is now cleared

To erase the monitor's memory, press and hold the "M" button until the letters "CL" appear on the screen. Release and press the "M" button again. The monitor will beep twice, indicating that the memory is now empty.