Replacement of fuses on Philips 37PF7320A 37 in. HDTV-Ready LCD

Read your Philips setup info that came with your tv very carefully and also if applicable read your cable box setup info very carefully then set every thing up like it says also check tv audio menu and make sure the audio is set to on

The unit is trying to start and can not. It then enters protect mode. This means that there is a problem and a full turn on would further damage the set. It should be blinking a code, this code will tell you what the exact problem is. If you call Philips at 1-888-PHILIPS, they can tell you what is the exact problem.

To figure out the code, count the number of blinks.

If you need further help, please ask, but I can't tell you what to exactly replace without more information.

Thank you and have a good day.

Please don't forget to rate this solution

lightning usually will damage the entire power
pcb and signal pcb.try power pcb first .this will probably repair the tv.

Changed power board and it is working. Has been for about 1 hour.

download owners manual for free to help with this problem

have power board / supply checked -- also check fuses on board first before you spend any money

hi!you can get the manual at http://www.retrevo.com/support/Philips-37PF7320A-TVs-manual/id/278ci358/t/2/
you may  have to make a fast and free registration..
hope u get ur TV working fast!
regards!hope i could help you..

send me a copy too if you found it, [email protected]

thanks...
KW

The TV is in some kind of protection mode, the blinking LED show you an error code.
Try pressing 062596 and then press menu button (do these in quick motion, don't let them to time out while keying)...see what happens
I also heard that this problem appeared with some people because the of the burnt fuse in the TV. To fix that it has to be taken to the tech shop.
And yes I also heard about this issue many times, seems like this TV set is very popular with this kind of problem.

Yes,you are correct.