Error code 6000 on canon pixima mini 260 - Canon PIXMA mini260 InkJet Photo Printer

P2 error is a paper jam code! Unblock jam and reset!

Canon Printer Error Code B200 may point to many different items, but it's essentially a problem with the overheating of the print head. Other than that, the issues usually have to do with the full waste ink tank, the full waste ink pad, and other parts of the printhead.

For the Canon Printer Error Code B200, Canon technicians recommend some generic solutions for this issue to users. This suggestion includes turning the printer off and turning it on. But we noticed some more comprehensive solutions for the solution involving dealing with the printer heads.

Easy Solutions that Fix Canon B200 Error

1.Turn OFF the printer
.
2.Unplug the printer from the power source.

3.Open the printer cover then reveal the ink cartridges.

4.Remove the printhead from the printer be careful.


Continue Reading - Canon Printer Error Code B200

how to reset the error signal 5 for canon ip4840

Error code 6000 on PIXMA MP260 to solve this issue, lift the lid and rolled the wheel on the right hand side (plastic with black rubber drive belt) connected to stainless steel shaft. This wheel should be able to roll in both directions for 10 full turns with no obsruction. If the wheel stops there is something jamming the drive motor giving error 6000. or see a little paper piece may cause jam.
good luck, do rate if soved

error [6000] or light blinking 3 times is mean there is an error occurred in the LF encoder signal.

Hi,

There is got to be a paper Jam inside the printer OR

Look for something that might have stuck up the roller ..

Thanks

Fame !

Canon Printer Error Code 6000 is one of the typical errors that occur very frequently. It happens while users are attempting to print all of the printer's documents. The problem of Paper Jam is the main cause of this failure. There are several explanations why Canon Printer Error 6000 will happen when you work with a Canon printer. One of the factors is that one of the most simple common explanations is where the paper feed tray is blocked by certain dust particles and bits of paper. Another reason for this is that the paper feed tray is not adequately connected to the printer. If there is a tonne of a print order.

Reasons that cause Canon Printer Error Code 6000:

1. The feed tray of the printer is improperly fitted.
2. A large number of documents near the printer.
3. The line feed is scratched or smeared.
4. Giving multiple paper print commands at once.
5. Faults within the sensor unit or in-line feed slit.

Follow Blog: Canon printer error code 6000

Thanks for reading.

You will need to call our technical support line on 0845 20 20 118. Click Here for help

printer gak bisa ngeprin error E6 gai mana cara mengatasinya