Could you send me a diagram how the drive belt goes around the pullys thanks its a craftsman lt 1000 not sure of the year model

If you have a Craftsman, under the seat is the model number. Go Here to get the operators manual. The manual will have all the belt diagrams. Water Filters Lawn Garden Appliance Parts

look for tag on inside of hood for belt numbers. Or get model number off of tag under seat that starts with a 917. then call the 800 number.
instructions... Remove deck, remove pto pulley/ clutch, lock brake, remove crank pully and belt from crankshaft then remove belt from transmission and idler pulleys. Reassemble in reverse order with new belt ensureing the belt is not snagged on any belt guides and all idler pulleys are free.. ( PS sharpen blades while deck is off and check deck belt)

i have a craftsman lt 1000 that won't move when the shifter says drive

is your idler belt adjusting pulley free and not frozen on the shaft

Hi
The part number for just the shaft is 137646 and for housing shaft and bearing is 130794.
Sam

my clutch belt will not stay on the pulleys Craftsman 42 in. LT 1000

In the Google search box type belt and pulley diagram craftsman lt 1000.....then Search images. The first 4 images feature "springs" however, you can clearly see the motion belt diagram. Hope this information is helpful.

Rox.

find every part you need on amazon here Amazon com Craftsman LT1000 Parts . take a look and enjoy

go to sears.com click on parts and enter your mod#

I usually jack up the front of the tractor and drop the deck as far down as it will go and have at it. You only have to remove a few belt guards and a rod or two and route the belt around the pulleys.Remember the v part of the belt goes in the v pulleys and the flat part of your new belt goes on the flat pulleys. And be sure to look at the diagram on the deck or in your manual.Hope this will help you. donnyb60