Change time i need help changing time on our phones, can you help me. Its the Euro Style 18d Avaya I have followed the instructions in the Merlin Mail Manuel and though I can change the minutes I am unable to change the hour

Log into System Programming by pressing Feature 00 then left Intercom button twice. Then press #101 and enter date MM/DD/YY. Then press Feature 00 to exit and save.

Here is a link to follow. Go to page 20. http://www.telephonemagic.com/PDFs/Avaya-IP-Office-manuals/Avaya-partner-ETR-phone-user-guide.pdf

Press Feature 00 (zero, zero) from station 10 or 11. Press left intercom button twice, press #103, and then enter time in military format (24 hr). Press feature 00 again. This is all done with the handset down.

Avaya Partner 18D Button phone:
Two possible solutions,
First, could have a bad handset cord.
Second, I have come across a bad handset connection ports on the Euro style phones. The handset cord and the port just don't mesh well or the port itself is bad.

http://dstech1.com/changing-time-on-a-partner/

Here you go.

When you log into the voicemail, what does the lady say?

Welcome to Merlin mail, merlin messaging, Audix???

Need to know the voicemail model....

It's the gray button labeled FEATURE just to the left of the #1 on the keypad.

If the voicemail you want to use is Verizons, it will NOT light the light on your phone.

For that to happen, you would need a voicemail through the phone system

The following is from here.
IF you have a Lenend or Magix system. IF SO, you will have a VERY LARGE display phone, ususally at the receptionist station. It will be either a MLX20L or a 4424LD+. If so....

Changing the time on a Avaya Merlin Magix system is accomplished from the system programming console. The date is change separately from the time.
Changing the date:
1. Press Menu
2. Press System Program
3. Press Exit or Start
4. Press System
5. Press Date
6. Enter the date as: mmddyy where mm = month, dd = day, yy = year
7. Press Enter
8. Press Exit or Back
9. Press Home or Exit
Changing the time:
1. Press Menu
2. Press System Program
3. Press Exit or Start
4. Press System
5. Press Time
6. Enter the date as: hhmm where hh = hours & mm = minutes
7. Press Enter
8. Press Exit or Back
9. Press Home or Exit

This must be done at extension 10 or 11:

Press Feature and dial zero zero

Press the left intercom button twice


To set the time, press the pound (#) key and dial 103. Enter the correct time using a 24-hour clock (if it's afternoon, add 12 to the hour...i.e. 3pm is 1500)


To set the date, press the pound key and dial 101. Enter the correct date using the format MMDDYY (two digit month, two digit day, two digit year).


Press Feature and dial zero zero to save your changes.