How i will enter in Sharp Ar 5316 photocopier machine programing and how i will remove maintenance sing
Hallow there, it is always good to understand a specific code and what it means because not all codes are cleared using simulations. Maintenance sign means that the copier needs to be well serviced and checked if something is to be replaced. Consumables such as drum, blade, fuser rollers and developer are changed at such times. If you are sure that you have replaced the correct part or nothing is to be replaced, then you can proceed to clear the sign.
Follow this procedure to clear maintenance sign; Press #, Interrupt, C, Interrupt. keys in that order. Enter 20 and press copy key then enter 01 and press copy key again then press CA key twice to return to normal mode. Wish you success.
hi,i did not replace the drum.by the way how do i reset the drum
please how do i get into service mode.thank you
get into SIM mode by pressing "#" key then "interrupt" key then "C" key then "interrupt" key again. enter 41 then press start - enter 01 then press start.
get into SIM mode by pressing "#" key then "interrupt" key then "C" key then "interrupt" key again. enter 42 then press start - enter 01 then press start.
×