I just bought a tasco trail camera. I set it up by the manual that came with it. It will take a couple of pictures and then it seems to shut off. If I take the batterys out and reinstall them it will work again but only for a few pictures and then I have to do the battery thing again?? It is model #119223c thank you Jim Vandeway..

I found this, but perhaps there is no activity at night. Check it at 1:00am, the LEDs should glow.

Camera stops taking images or won't take images

• Please make sure that the SD card is not full. If the card is full (display indicates "FULL", the camera will stop taking images.
• Check the batteries to make sure that they are new alkaline or lithium AA batteries. See note above about short battery life.
• Make sure that the Power/Mode Switch is in the ON position and not set to OFF or AIM.
• Make sure that you are using a good quality SD card in your camera. Tasco recommends SanDisk® SD Cards up to 32GB.
• If the SD card has its write protect switch in the lock position, the camera will not take images.
• If you have used an SD card in another device before inserting it in your Tasco Trail Camera, you might want to try formatting the card using the "Format" option in Setup Mode (pg. 8). Make sure you have backed up any important files first, as formatting will erase all previous files. In some cases, other devices may change the formatting of the SD card so that it will not work properly with the Tasco Trail Camera.

Read more: https://manuals.plus/tasco/tasco-trail-camera-instruction-manual-119270cw-119271cw#ixzz7PnF3S7pS

The replacement tray is $10.

https://www.google.com/search?q=tasco+trail+camera+battery+tray+replacement

Or contact Tasco, their after sales service and support is pretty good.

..

Did you put a memory card into it and did you format it inside the camera? Did you read the manual twice?

Please always include full 'make model (what it is)' in all questions to better help you. You can also add on to your last post so John can carry on helping you.

https://www.fixya.com/answer/answerpageslideview.aspx?thid=29852556&ctg=465

..

I used http://www.google.com and entered the words 119270CW to find manuals for tasco equipment.

http://www.tasco.com/pages/instruction-manuals/

http://www.tasco.com/products/manuals/119270CWand119271CW_TascoTrailCams.pdf



http://www.tasco.com/products/manuals/119270CWand119271CW_TascoTrailCams.pdf

I think the manual at the link will give you the info you need, it is a 119256CW, but should work. http://www.tasco.com/products/manuals/Tasco%20119256CW_TrailCam_1LIM_web.pdf

Hi!...

You can get the manual for this type of Tasco Trail Camera here:

Instruction Manuals Tasco Believe it

I hope this helps you!

Bad camera, try have them replace it,or fix it for you.

I just bought,last August, a Tasco Digital Trail Camera - 119223C . Took pictures until Jaunary 2011, my camera display shows Loc and the SD Card flashes. The instruction manual does not reference this setup code. Does anyone know what 'Loc' means? I tried to reformat card, I also so not get a Y/N option for formatting. I bought a new card and changed batteries. no change!

If it takes no pictures then you set it for day only. If it takes pictures that are black then the capacitor that controls the flash is not functional.

http://www.tasco.com/products/manuals/Tasco%20119223C_1LIM_web_rev5.pdf