I had a 1000hg modem which went bad but, the loco network worked very good. I could no longer connect to the internet with the AT&T Tech replaced it with the 2wire modem 2701HG. Now my network doesn't seem to be working. I can only share file one way when I use to go in both directions. In other words only one computer can open and use file on the other computer but, not vice versa. 1. Computer is eithernet and the other one is 2. WiFI with a wireless card. the wireless can't see the eithernet computer but the eithernet computer can see a limited amouthe of files and folders.
There are many applications that can help you convert your files quickly and effectively. In my opinion you should use shareit pc because this is a very effective and outstanding file transfer application. You can download the shareit application at some reputable addresses or access the address https://shareitdownload.net/shareit-for-pc/
You can Simply install Shareit on both the computers. You can even use it on your Android or IOS smartphones.SHAREit lets you transfer files from different devices like phones, tablets, and computers. It is a free to use software.
download ShareIt for PC
https://shareit-pc.downloadops.com/
Hey! don't worry too much!
1, Simply install Shareit on both the computers
2, You can even use it on your Android or IOS smartphones.
3,SHAREit lets you transfer files from different devices like phones, tablets, and computers. It is a free to use software.
SHAREit
Hey Capb, sounds like this "modem" is set up differently from the old one in that it is separating the wired and wireless network traffic. If you are a little technical, you might check the IP addresses of both devices and see if they are on the same networks segment.. like 192.168.1.100 and 192.168.1.101 or some such.
SOURCE: Lost Ethernet and Wireless Connections in Modem
I've not used one of these 2wire boxes before, but I believe the default router's address is 192.168.0.1. Try this instead of gateway.2wire.net to see if you can gain access to the router. This is just the starting point, but see if it works.
Here's a link to, what I believe is, the router's manual.
Before you rate this please let me try to help some more. This could be a multi step process...
SOURCE: port forwarding? 2wire 2701hg-T
access your gateway homepage by opening your internet browser and typing this on the address bar: 192.168.1.254/management. then key in your system password and click on Settings under Firewall. there's option#2 (allow individual applications), click on "Add a new-user defined application", input the data and click submit another way is to enable DMZ plus mode. that option would actually make all the ports open. use this if option#2 is not working. after making the above changes refresh your router, just unplug then replug it from the power.
SOURCE: 2wire xbox 360 wireless
My 2 wire is a home portal 1000 which doens't have wireless. So the easiest way to solve this is to get a wireless router and plug it into your 2 wire router (I did this) then connect the xbox 306 to that.
SOURCE: 2wire 2701HG-B constant power loss
Hard reset the router and reflash or update the firmware.
If still wont work then it will be hardware problem (bad memory).
SOURCE: just bought a 2Wire Gateway, router/modem.
Try contacting your internet provider for set up instructions.its probably a configuration problem.RICHARDM69
218 views
Usually answered in minutes!
Are the two computers in the same location? If so,use a USB connection instead.
If not, try a free online service on both computers, such as TeamViewer (TeamViewer.com). TeamViewer will let you view each computer, remote operate the computer/s, and transfer files. It is free for personal use.
×