When we record, it has strange lines & colors in it, also have had one time that it did not even record

CONVERT to DVD CONVERT to DVDWe can Help YOU.
FILMS8mm Films + 16mm Films +
VIDEOALL Videos on Tape - Any Tape = (Analog Tape and Digital Tape) + ALL Digital Devices + MiniDVDs + Cell Phones +
AUDIOAudio - Tapes / Cassettes + Audio - "Reel to Reel" +Audio - Vinyl LP Records +Audio - Digital Recording Devices+
PHOTOS & SLIDESPhotos +Slides +
PAPERPaper Documents + Legal Papers + Legal Contracts +Maps +Drawings.(For Storage, Achieving and Fast Retrieval of Information. It works like the Internet on DVD with a WORD SEARCH.)

ALL These recordings are being destroyed by the atmosphere - with time - even if you don't play it. Think of your FUTURE GENERATIONS to come. NOT just your Children and Grandchildren. Think of 500 years time - 1000 years time. Think BIG..You need the BEST QUALITY - for them.
OUR PROCEDURE IS THE BEST PROCEDURE - BEST QUALITY
From your tape, we 1st amplify and boost the signal (to Retain the best final quality),this signal is then digitized,the digitized signal is placed on the time line in the computer.
On the time line we can immediately Create your DVD in the computer and then Burn your DVD copies. orOn the time line we can do Editing and then Create your DVD in the computer and then Burn your DVD copies.orOn the time line we can do Editing and then Create your DVD in the computer with a Landing Page with Scene Selection Buttons (Chapter Markers) and then Burn your DVD copies.
After discussion, you tell us how to proceed.
Video Recording Centre & Photographywww.photoandvideo.co.za+27 11-786-8782 +27 11-885-1392Mervin [email protected]

You may be recording things that have inbuilt security. Some of the things you get on Sky or Cable have security programs built into them, so that they cannot be recorded. When you record them they either come up as a static picture, or the picture jumps around, or it has a line through it. It's usually pay per view items that have these problems.

Look on the back of the copier. If it doesn't show watts calculate yourself. amps times volts. For instance 120 volts at 15 amps is 1800 watts. Keep in mind this does not use that all the time only when all is on and running, and even then only when the fusing heater lamps are activated. Also look at the paper deck if it has one to see how much power it uses and just add its watts to your copier watts. Add the watts plus watts. The paper decks are minimal compared to the copier. So just going with the copier is enough. Always have a dedicated power source for the copier, because newer copiers are digital. They cannot be hooked to the same plug as a refrigerator or soda machine etc. Noise enter the power line and can cause the copier to do strange things. Always make sure the power plug ground when measured against neutral is less than 1 volt ac. Anymore than that is trouble with digital circuits.

Ur convergence it dead.Must change convergence ICS and all it resistors.Buy a convergence kit at Tv repair World.com,Tv repairkits.com to repair it ur self.If u know how to solders?Shop will cost U $300 for parts and labors.

you need a tri-color (red,white & yellow) rca cable wire w/ gold tips.....either on the front or back of dvd-rec ....connect wire to the in (line 1 or line 2) coming from the play out on the dvd-player....your dvd rec is still connected to the tv right...on the dvd rec using remote select line 1 or 2 which ever is connected...(test..by playing a dvd in the player..if you see the picture plus hear the audio this means its connected correctly and can be recorded)...note some Disney dvds are not recordable...hope this is helpful.............feel free to rate

color & lighting problem

These are actually called PCU ( photo conductor unit) and yes they can be required to be changed frequently at times. I work on a lot of Ricoh printers and this is a common issue.

The lens has been damaged and the light is being reflected within
the lens casing. These reflections are confusing your picture recording mechanism
camera.

check the refresh rate, and other related adjustments

You can get this sometimes in Publisher programmes, it's a glitch, but also check cartridge alignment. If your not happy uninstal printer driver, disconnect printer and re instal driver first then re connect your printer.