Want to know how to download music from computer to ativa player

make sure the format of the movie your putting onto the mp3 player is encoded as mp4...if its not then it wont work. to do this you download an avi to mp4 converter and go from there.

Your player is a rebadged Perception Digital PD6050. The manual and firmware are here. http://www.perceptiondigital.com/?en-download.html

Perform a reset as per the manual and download the firmware utility. Install the firmware utility, connect your player to your computer and re-flash the player with the firmware.

first off find where your music is stored and open up that window then open up a window with you mp3 player in it and drag and drop the music into the window with your mp3 player, or you can use windows media player to do the same thing, open up windows media player and connect your mp3 player then once it recognizez it open up the music library and start dragging the songs you want from the list over to the sync list and after your done click on the sync button and wait after its done you should have hours of music to enjoy

I lost my installation disk as well but I found, thru the manual, that the Ativa player plays videos in SMV format. so try to find a converter for that online.

It is supposed to charge with either an adapter that plugs into the wall ie: DC 5V 400mA, or through a USB 2.0 port on your computer. The 1.1 USB ports do not carry enough current to properly charge any USB powered items.

MP3 players generally copy music over in a set way.  Usually that's however you have music stored on your computer.
Once on the MP3 player, you won't be able to rearrange the music, in most cases.
You should try arranging the music on your computer (which is time consuming, if you have a lot), and then move it to your MP3 player again.

It charges through the computer via a USB Cable. there is no power adapter for it.

how to put music on mp3/mp4 player