Parts for Whiz Bang Model 2003

the whiz bang is out of adjustment for your back azimuth. Should be 20 dgrees N X NNW. Unless you have a Cobra shifter matic with Whiz bang on the fly adapter.

Any Gold Medal dealer will be able to find one. There are 3 different styles depending on the age of the popper.
It is always cheaper to repair Gold Medal kettles, replacements are very expensive. That model they run $750-$1100.

Contact Gold Medal to find your local dealer for service. 1-800-543-0862

Yes you can purchase new kettles complete or just the bottom half most of the time with the gold medal brand. When you see the prices you may want to consider repairing or rebuilding it. That's what I do unless there are so many parst needed that a new one would make more sense because I believe you will get a warranty with the complete kettle?

Star 59 is an 8oz popper, they stopped making them in 1992. Parts are becoming very expensive, usually better to dispose of the machine.
I have some used parts available, depending on which ones you want, or you could try partstown.com for Star parts.

Old popcorn is the first thing to check, and that you are measuring correctly. 12oz of popcorn is the correct amount in a 3 min popping cycle. always time the 2nd batch.

That model popper has 2 heat elements, and 2 thermo stats that control them. If the first 2 things to check are good, then you dropped a thermo stat or heater and it is operating on 1 heater instead of 2.

Available replacement parts for the Gold Medal line can be ordered from this site

http://www.gmpopcorn.com/store/index.cfm

I did not see the part you are looking for and before looking on the second hand market would recommned you contact Gold Medal Technical Support at 1-800-543-0862.

I am pretty sure the model number you are referring to are HSS25IFMCC / HSS25IFMWW This model has no defrost timer like the typical defrost timer. The defrost time is determined by the Motherboard. If you are having defrost problems with your model it is most likely the defrost heater causing the problems. The defrost heater is part=> WR51X10055 Defrost Heater

Most times after manually defrosting the defrost heater on your model can be seen burned out
by just looking at the outer glass of the heater itself. This takes unplugging the refrigerator and removal of the rear panel inside and back wall of the freezer

Most times after manually defrosting the defrost heater on your model can be seen burned out Testing the defrost heater can be found here=> WR51X10055 Defrost Heater Assembly Once inside the freezer it is always a good idea to change the defrost thermostat, Click Here=> WR50X10054 Defrost Heater
I will be here should you have questions, Thanks Sea Breeze
Click Here=> HSS25IFMAWW Freezer Components parts 230 is the Defrost Heater and part 230 is the Defrost Thermostat

yes you can buy all the parts for the heater here:
http://www.parts4heating.com/Pool-Heaters-Teledyne-Laars-LX-LT-s/435.htm

Specifically this is the part for a heater built after 2003
http://www.parts4heating.com/SearchResults.asp?Extensive_Search=Y&Search=R0302000

There are many ways that this could have caused your problem! Too much popcorn kernels put into bucket!....somthing in the bucket that is causing it too stick! (I would never put salt or any other seasoning in the maker untill popcorn has dropped) anso the heat from the maker itself can cause warping of the metal parts inside over time! I cant tell you what parts to order because i dont know the model number,But If you have all the pats somone of little skill should be able to fix it for you by bending it back into place and putting it back together and trying it! If not come back with the model # and we can help with the parts!
Please rate my response
THANK YOU!

I am also looking for replacement parts for my ccp-509, specifically the kettle plug connector (female)