The ignitor keeps clicking after the value is turn off. Only when you unplug it it stops.It was bumped.

Wait awhile until the stove has a chance to dry out more.

use a blow drier to dry the igniter and knobs.

A creda microwave oven doesn't have an ignitor or burner, so I assume you are talking about either a BBQ grill or gas range.

A suggestion: Clean the ignitor tip with a CLEAN and DRY green scouring pad; check that you have gas coming out of the burner.

If you have gas at the burner and the ignitor is clicking (sparking) then it is usually an ignitor alignment problem where the ignitor got bumped out of position.

Hi,

Here is a tip that I wrote that will help figure out why the burner spark keeps on clicking...

Gas Range Repair Burners Keep on Clicking

heatman101

There are switches behind the knobs that turn the spark igniters on when they are turned. they usually slide over the shaft and have two wires coming out of them. They are usually wired in series so the way I check them is to unplug the machine and disconnect the last one first then plug it back in. and repeat this until the clicking stops. when it stops you found the switch that is faulty. Take your model number into your local service shop and they can order one for you.Be carefulnot to let the wires touch metal because thes are live when plugged in.

Hi,
This tip I wrote to help people with the problem of the spark not shutting off...the clicking non-stop is a common problem.

Gas Range Repair Burners Keep on Clicking
http://www.fixya.com/support/r4033033-gas_range_repair_burners_keep_clicking

heatman101

THAT IS THE IGNITOR FOR THE GAS. TURN THE KNOB JUST BEYOND THE START POSITION AND IT SHOULD STOP. IF NOT UNPLUG THE STOVE AND FIND THE IGNITOR ON THE BURNER HEAD AND CLEAN IT WITH A SOFT TOOTHBRUSH. PLUG THE STOVE IN AND IT SHOULD STOP CLICKING

damaged ignitor switch, either something spilled on it or it has failed...depending on unit could be a spark module control also. let sit unplugged for a day or two and see what happens.

Hi,
Here is a tip that I wrote that will help figure out why the burner spark keepson clicking...

Gas Range RepairBurners Keep on Clicking
heatman101

ioy

Dry the ignitors and see if that works. If not, then get new ignitors.