Lost remote for my quasar tv/vcr combo, can find any universal remote to work

The remote model number for the Quasar VV2008 is VSQS1570 and can be ordered from Panasonic at 1-800-221-7262 or Go to a Family Dollar store and purchase the grey RCA universal remote for $6.00 about 6 inches in length. When you are ready to program it for the Quasar VV2008 push the code search button then the VCR button and enter 0162 then push enter. The red light should go off and the remote should turn the TV/VCR off and on. It worked for me 4/19/2013

Sometimes the universal remotes do not compromise fully with certain models especially with combo models.
So you might a different type of universal type to connect with the Quasar codes, but it is ideal if there is the model mentioned in the manual of the remote.
Volume and channel working is what is most important and should be considered good enough.

Go to Wal-Mart and find a universal remote that has all the features of your lost remote. It should have all the codes for each brand with it.

Quasar 0 0 5 1 ,0 2 5 0 ,0 0 5 5 ,0 1 6 5

Use these in a universal RC

Please rate our help tpo keep the free service online++++Thanks for using FIXYA

Standard universal remotes rarely work well with combination devices. Try programming the TV part in the TV mode and the VCR functions in the VCR mode. If this doesn't work you may be out of luck unless you get a logitech harmony remote. You might be able to find one on ebay for about $50. Depending on the model the usually run $150 - $1000. These remotes need to be set up with a computer but the program is pretty strait forward. This is the only remote that I can guarentee will work.

can you please send me the tv vcr combo code for my philips remote, to the old quasar tv. thank you [email protected]

Try this site:
http://www.remotecodelist.com/remotes/

Bill

You must buy a universal remote and be sure and get one that has a menu button on it.

is it for the tv or the vcr ?

for tv only try 003,054, 070 for vcr try 021,022,125