I need a new printhead for my lexmark205.where can i order one?

A long story, short answer: probably you have a problem in your printer. You should take it to a repair service and hoe repait kit is available for this model.

Sounds like you need new printhead. Take a look on amazon for replacement, here: Genuine Lexmark 100xl 100 Print Head 14N0700 14N1339 Printhead for Lexmark.... I hope this was helpful, Cheers

First check for foreign objects in the printer cartridge area or a loose print head.

Then there are two possibilities if it was a Printhead error. You can replace the printhead. Order one from Canon support: 1-800-828-4040 Monday-Sunday 8:00 a.m. - 12:00 midnight. EST, excluding holidays. Say Order Parts to be connected to the Parts Desk. Be sure to have your model number (i320) or part number (QY6-0044-000) ready for the sales person. This is a non-returnable item. The other option is that the entire printer needs repair (professional service).

You can't tell which issue you have until you try a new printhead.

I wish that I could be of more help.

Cindy Wells
(printhead alignment and cleaning are much easier to check.)

Hi,

through my experience this is a printhead error message. Make sure that the printhead is seated correctly in the printer. If the error persists all you need is a new printhead. Contact Kodak under 1-800-421-6699 or go through the Interactive Step-by-Step Solutions tool under www.kodak.com/go/itg. Choose All-in-one printer - Print quality - Problem is not listed and follow the steps, then you come on a site where you can order a new printhead for free.

issue is with printhead.

Try re-installing the ink cartridge....clean printhead from Menu > Maintenance > Clean printhead.

Else, visit www.kodak.com/go/itg and follow the steps to order a free printhead for you.

Or
call 18004216699 and get a printhead free of charge

Yes, you're right. You need a new printhead. You can make the stap by steps solution on the kodak website and then you can order a new printhead there.

First off, remove the cartridges. There's a small button/lever up under the top of the printhead that you have to press in, its in the very center. Once you press that in, it should pop forward and allow you to pull it out. In order to replace it, just pull the old one out, pull the yellow tabs off the new one and snap it in place and put the cartridges in.

You can download the user manual from Kodak. It will give you the info you need. It is a little trick to get the old printhead out, but it snaps into place at the top, so that is where you need to release the old one.

You all need a new printhead. If the eyes on the demo sheet (copy and photo at the same time) are coming out all white and they look like zombies the black text isn't working properly. Try cleaning the printhead. If that doesn't work, call kodak, you need a new printhead.

if they are diferent resolutions, ex. you change from 200 dpi to 300 dpi, you need to change something inside the printer like the gears (just reversing the platten roller gear and the the withe gera on the motor) and you are printing on 300 dpi with very small fontes.