Hi,
I am sorry to hear regarding the trouble.Unfortunately, display should never go out. As you mentioned that everything else works, other than ' no lights ', this is highly suggestive of an internal failure.You can try a hard reset using the procedure below, but beyond that the unit should be exchanged or serviced.
Try
disconnecting the unit from AC power, then unplug and re plug all of
the other cables to the unit. After 60 minutes, plug the unit back into
AC while at the same time pressing and holding the power button for 5-10
seconds. This should reset the processor and hopefully allow the unit
to operate properly once again.
Let me know,if needed further assistance.
Hope i helped you.
Thanks for using ' Fixya ' and have a nice day!!
441 views
Usually answered in minutes!
×