I am a complete dummy so how can i upgrade the flash player so i can catch up on radio and tv programmes please. I have an asus note book computer and now cannot get radio and tv programmes like i could before,it says i have to upgrade but as a dummy i don't know how can you explain what i have to do to get back to getting he progammes i am missing please,i thank you in anticipation for any help you can give,and i hope you can understand from this what my problem is.

Freeview TV is received through an aerial and the reception is only available locally. If South Africa has free-to-air TV transmissions you will be able to receive them if you are in the reception area and have the appropriate set-top box and aerial.

Most UK TV companies have websites that allow viewing of current programmes plus catch-up viewing of series and recent programmes and special interest programmes for sometimes an extended time.
I expect many TV stations around the world have a similar arrangement so it your internet connection is good enough you should be able to watch TV programmes from many nations on your computer.

If your internet isn't so good you could explore the world of international radio which sometimes has a much better picture than TV (in your mind's eye).

Tips to fix-
1. MP3 and USB Flash drives are recognized as removable disks on the computer. To avoid data loss and firmware damage due to abnormal disconnect, please properly eject your device before removing from the computer.
2. You can press the Reset button for about 3 seconds to restore to its default states. This action WILL not delete any data stored in your MP3. Reconnect your device to the computer or to a power adapter to see if it can be turned on.
If the problem still exists, please go to Transcend Download Center (Here) to download the latest version of firmware. Follow the instructions to upgrade your media player.
Please note that upgrading firmware will DELETE all the files in your MP3 player. Please backup your files first before upgrading the firmware.


Regards,
Rachel Gomez

Hi There,

Welcome to FixYa. If you've already downloaded the flash player but still getting that "upgrade" message, then chances are you have not downloaded and installed the latest version. I have provided the link below which will bring you exactly to the download page :

Latest Adobe Flash Player

Download the installation files and follow the onscreen prompts until it's completed. I recommend to restart the computer after the installation for it to fully work.

Please let me know if this helps you - do get back to me if it doesn't.

Thanks for using FixYa.

There is a very good series of book computing.
This range of book are "For Dummies" I recommend them for beginners and experts. There is on specific for Windows XP.
Please click on this link the the Dummies Store :-
http://www.dummies.com/store/product/Windows-XP-For-Dummies-2nd-Edition.productCd-0764573268.html

Hi,

Videos on YouTube are streamed through Adobe Flash player. If you're having trouble playing and viewing videos YouTube, we suggest you install the latest version of the Flash player: this will allow you to easily play YouTube videos.
Here's how to upgrade to the most recent version of Adobe's Flash Player:

1. Before installing the most recent version of Adobe Flash player, you will need to first uninstall any older versions of the Flash player you've installed in the past and currently have running on your computer.
   
   Please completely uninstall the version of Flash you're currently running, before upgrading to the most recent version. To uninstall Flash, follow Adobe's instructions, listed here. You'll need to download Adobe's official Uninstaller to remove Flash.
   
   
2. Once you've uninstalled the older version of Flash, you'll be ready to upgrade to the most recent version of Flash.
   To upgrade to the most recent version of the Flash player, please follow these steps:
   
   
   1. Follow Adobe's instructions for reinstalling the most recent version of Flash.
      
   2. Once you've downloaded the latest version of Adobe Flash, please exit your browser.
   3. Finally, click to install the update that you just downloaded to your computer from the Adobe Flash site.
      Once you've done so, open your browser again and go to YouTube. You should now be able so successfully watch videos!
   
   

If the instructions above don't resolve the issue, please also try the following:

1. Temporarily disable popup blocking software installed on your computer to test.
2. Allow YouTube.com as a trusted site in your Firewall software.
3. Ensure other applications like Quicktime, iTunes, Real Player, or Windows Media Player aren't set as the default streaming application, as this might affect the video player.

For Windows Vista users:
If the Flash uninstall / reinstall does not work this maybe due to a Microsoft Windows Vista permissions issue.
Please use the Windows button at the bottom left then the search function:

• Go to: C:\Windows\System32\Macromed\Flash\.
• Right-click on the following file: FlashUtil9b.exe or FlashUtil9e.exe.
• Select "Run as Administrator" and install the update..
• Restart your computer.

Please post your feedback and vote if the issue is resolved as per your satisfaction.

if(document.getElementById('kb_ie7') != null) showLayer('kb_ie7'); if(document.getElementById('kb_ie7_win') != null) showLayer('kb_ie7_win'); if(document.getElementById('z_ie7') != null) toggleZippy('z_ie7'); if(document.getElementById('z_ie7_win') != null) toggleZippy('z_ie7_win'); if(document.getElementById('kb_ie') != null) showLayer('kb_ie'); if(document.getElementById('kb_ie_win') != null) showLayer('kb_ie_win'); if(document.getElementById('z_ie') != null) toggleZippy('z_ie'); if(document.getElementById('z_ie_win') != null) toggleZippy('z_ie_win'); if(document.getElementById('kb_win')) showLayer('kb_win'); if(document.getElementById('z_win')) toggleZippy('z_win'); if(document.getElementById('kb_winvista')) showLayer('kb_winvista'); if(document.getElementById('z_winvista')) toggleZippy('z_winvista'); if(document.getElementById('kb_IN')) showLayer('kb_IN'); if(document.getElementById('z_IN')) toggleZippy('z_IN'); if(document.getElementById('kb_non_US')) showLayer('kb_non_US'); if(document.getElementById('z_non_US')) toggleZippy('z_non_US');

Hello,

I recommend FireFox

Download Adobe Flash player

As I don't know what current Acer Aspire One model type you have, I can not advice upgrade for memory.
As far as I know the AoA150, you'd have to open the entire laptop just to reach the memory and upgrade it.
The AOA150 has a kind of build in RAM on the mainboard BUT has a additional slot where you can add additional memory.

Hi.
Welcome To Fixya Community.

Solution 1:

• Try to Turn it ON/OFF(Reset).

If that isn't Working try This:

Solution 2:

• You are going to upgrade the Firmware of your Mp3 Player in order to perform that follow these Steps:
  

• Installation of the Upgrade Tool:

1. Download the Upgrade Tool application (the download link is in the bottom of this Solution) to your computer.Double click the application.Follow the instructions shown on the screen to complete the installation.Firmware Upgrade:Note: All the existing files in the player will be erased while upgrading,please make a copy of your files before doing this.Turn on MA852-801 player. Press and hold the MENU button todisplay the main menu. Select “Settings” → “System” →“Upgrade” and press the MENU button to confirm. Select “Yes”and then connect the device to a computer via USB interface once you see the following window:

******************************************************************************

******************************************************************************
2. Select ”Program files” 􀃆 ”Firmware Update” from the Start
menu or double click the “Firmware Update” icon on the
desktop. You will see the following window shown on the
screen:

***************************************************************************************
***************************************************************************************
3. Click Open button, and specify the upgrading firmware with
the extension “ .rfw ” (Please download the firmware from
Nextar website named MA852-801 – updated firmware.rfw).
Click Update button to start upgrading.
Note: This process may take about 2 minutes depending on the
computer system you use. Please don’t disconnect while upgrading,
it may cause serious damage to the player.

***************************************************************************************

***************************************************************************************
4. Once it shows "Firmware update successful"wording in
“Update Info” window, then click Exit button to finish
upgrading.

***************************************************************************************

*************************************************************************************(5) 5. Safely remove the player from the PC.
6. Turn on the player. Please wait about 20 seconds for the
player to automatically initialize settings.


Downloads:

Upgrade Tool.
Firmware File.

Additional Help:
Nextar Ma852-801 Mp3 Player Manual Guide.

please don't hesitate asking me if you need any Further Info.
Thank You For Using Fixya.
Good Luck.

How To Clone a BPR40 Radio
Cloning duplicates the contents of your radio (master radio) into the new radio (slave radio). Tuning and alignment information are not affected by cloning.

Set Up the Master Radio

1. Turn off the radio.
2. Press and hold Programmable Button 1 (the top programmable button) and turn on the radio. Keep pressing the Programmable Button 1 until beep is heard twice.
3. Release Programmable Button 1. Notice the LED changes to RED

Set Up the Slave Radio
1. Turn off the radio.
2. Press and hold Programmable Button 1(the top programmable button) and turn on the radio. Keep pressing Programmable Button 1 until the beep is heard three times.
3. Release Programmable Button 1. Notice that the LED changes to GREEN

BPR40 Radio to Radio Cloning Procedures
1. Connect the cloning cable to both the Master and Slave radio.
2. Press and release Programmable Button 1 of the Slave radio.
3. Within 2 seconds Press and release Programmable Button 1 of the Master radio.
4. The LED for both radios show flashing orange during cloning.
5. Once cloning is completed, an

yes.. supposed to be bios 1202 but don't know if you can get it any more may have to use1204
download from asus.com/download/download.aspx?
you can find the manual for your computer there also. use the global link.
you can download how to flash bios there under How to Upgrade Bios. you will want the Asus Winflash Procerdure for M2
it is easy and free

You can try to reset the device by pressing the power button for about 15 to 20 seconds and aslo i would recommend you to get the firmware upgrade for your device..to get the firmware upgrade please follow the link below...

http://support.rcaaudiovideo.com/downloads.aspx?product=384

I hope this helps
Thank you
Computerrep

***Please rate accordingly..