No instruction manuel for model J VM152H 002 (was installed when we moved_

Leonid,
Here is one place you can try.

http://www.repairclinic.com/Shop-For-Parts/a6b95c70d1007401/Model-RVM1325BW02-Hotpoint-Microwave-Handle-Parts

HELLO.

Way out to the problem.

The best place to get the microwave oven manual guide is to visit the manufacturer website to order for the manual stating the microwave model number and give our house detailed address.

However microwave manual guide can also be purchase at any microwave oven authorized dealer around your local area with the model number for compactibility(easy use).

Thanks.

It sounds like the magnetron may have either failed or is not being supplied with the extremely high voltage required to run it.

YOUR SAFETY IS PARAMOUNT

This is a job for a professional but if you are safety clued up, here's instruction.
Make sure the !!!!any capacitors are discharged!!!!! before attempting any sort of repair.
Check the door interlock switches first then the high voltage diode with either an AVO model 8 or moving coil meter on high resistance range for short circuit, (DVM's won't show the fault!), the capacitor can fail and go short circuit, the feed fuse on the primary of the high voltage transformer and then finally, the magnetron is best checked by substitution.
Hope that helps.

The instructions for this model can be found here:

http://www2.panasonic.com/consumer-electronics/support/Home-Appliances/Microwave-Ovens/Prestige-Countertop/Built-In-Microwaves/model.NN-P295SF

Hope this helps!

It sounds like the magnetron may have either failed or is not being supplied with the extremely high voltage required to run it.

YOUR SAFETY IS PARAMOUNT

This is a job for a professional but if you are safety clued up, here's instruction.
Make sure the !!!!capacitor is discharged!!!!! before attempting any sort of repair.
Check the door interlock switches first then the high voltage diode with either an AVO model 8 or moving coil meter on high resistance range for short circuit, (DVM's won't show the fault!), the capacitor can fail and go short circuit, the feed fuse on the primary of the high voltage transformer and then finally, the magnetron is best checked by substitution.
Hope that helps.

Load test.

A simple safety test.
Place 1/2 litre of water in a glass container. Measure the temperature of the water.
Place in microwave and heat on full power for 1minute.
Measure the temperature after it has stood for 1minute.
If the temperature difference is more than 9 degrees Celcuis the magnetron is working and producing about 700Watts of heat.
If your microwave is labelled with 900 or 1000Watts. That is about right.
If the temperature is less then the magnetron is not working properly and may need replacing.

This a only a rough guide and any doubts you should consult an authorised service agent.

Since you did not give model number I am providing info for one type of MW that may be similar. If you want specific info for your MW find model number and consult this page: http://shared.whirlpoolcorp.com/product_literature/search.jsp
Otherwise here are the installation instructions I found that you can use in reverse to figure out how to remove your MW.
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Installation%20Instructions%20-%20W10238252A.pdf

I just pulled my ge spacemaker xl1800 out. The mounting plate installs on the wall and two 4-6 inch bolts go through the cabinet above and into the top-front of the unit. The two top mounting holes are about 8 1/2 in. from the back of the unit and about 1 1/4 in from the side. If you don't have the mounting bracket that comes with the unit, you will have to use a 2x4 or similar to support the back & bottom of the unit.

Go to managemyhome.com and register. This is a FREE service. Once registered, go to the "Home Manager" drop down menu and click on the "Owner's Manuals" link. Follow the instructions on the next page by providing your make and model number. Your manuals are listed in a downloadable .pdf format. All you need is Adobe Reader installed on your computer to view. I hope this helps you.

You can download GE owner's manuals and installation instructions here.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Although you gave an incomplete model number, Owners Manuals, Installation Guides, Warranty Guides and Part Lists can be found for the entire MH3184 series on this page: Whirlpool Product Literature/MH3184 Series

Hope this helps!