Our fax machine - panasonic model fp-342 can't received fax due to error display "fax memory full" . How can i fix that?

I have a problem with the fax machine in question is panasonic kx ft77 . When receiving a fax error expel warm up and stop receiving the document. Or does anyone know what the problem is and how to fix it ? Thanks in advance

no dial tone is coming in the machine, how to set it please

Unplug the power cord for 2 mins.

The memory is full of received documents due to a
lack of recording paper, a lack of ink film or a
recording paper jam. Install paper (page 13), install
ink film (page 11) or remove the jammed paper
(page 63).
the entire manual here http://service.us.panasonic.com/OPERMANPDF/KXFG2451.PDF#page=53

The refills that fix the kx-fp135 will also fit your model kx fp 200. Office Depot has this and it can be ordered onlin. : http://www.officedepot.com/a/products/288514/Panasonic-KX-FA136-Black-Imaging-Film/

That error is related to the laser unit. Check your connectors, they may have vibrated loose during move. These machines have a history of laser units going bad.

Sounds like your memory is full. Either reset the power or try to take the memory off, there is a button on Panafax machines, then send the fax manually.

paper jam or missfeed always due tothe following:-
1-malefunction of paper feeding system due to broken gears belt chain please check smoth mechnical movement and apply light grease in gears and change any broken part.
2-something is blocking the paper path (staplers-pins)droped inside.
3-malefunction of paper detection micoswitch please confirm free operation for the lever in mechnical one and clean of dust and dirt from optical one,

my fax do not send paper but it's reciver and copy it .
what solution ?

this is for the uf 7000 you need to do an all job clear on the machine to try and fix your problem, sounds like a memory lockup