I get the DL on my washer - Whirlpool Duet GHW9150P Front Load Washer

The DL error code is an indication that the door lock is having problems locking the door or confirming that the door is in fact locked. This is usually caused by a defective door lock assembly, wiring connection problem or the machine control board.Mar 9, 2009

Why is my Kenmore washer displaying a DL error code?

and more

https://www.google.com/search?q=Kenmore+top+loader+DL+error+code

..

Check this website Dawn for the solution on your issue.
How to Fix quot DL quot or quot quot Error on Whirlpool Duet Washer...

your washer has problem with door switch replace it.it will work fine.

Hi

Error F dl indicates door latch failure and to resolve this issue you'll have to replace the door latch assembly. Also before doing this you can leave the washer unplugged for 30 minutes and then check the door latch assembly, if bad replace it. Please post a comment if need more help.

Thanks

Rylee

Try this site:

http://adsisecurity.com/KenmoreWasher.htm

Hi,

"dl" indicates a door lock error. A Door Lock Error occurs if the door cannot be unlocked. It will try to lock it 6 times before displaying the error.
Check for the following when dl occurs:

• Door Lock Mechanism broken.

• Check Door Lock/Switch Assembly for foreign objects

• Check Wire Harness connections to the Door Lock/Switch Assembly and Central Control Unit (CCU)

• Door Lock/Switch Assembly Failure

Thank you !!

try to start another cycle then hit cancel and cancel again and it usually unlocks the washer

The dL error code is a door lock error. The control board will attempt 6 times to lock the door before displaying the F dL error code. This is an indication that either the door lock is malfunctioning or the control board is not responding to the door locking circuit. Be sure the door is securely closed before attempting to start the washer. Open the door & check for clothing or something that may be stuck in the door boot area. If the door is securely closed & you still have the error code I would recommend having the door lock assembly replaced.

Good Luck and Please rate

"dL" indicates Door Lock Failure: dL flashes if the following conditions occur:
Door lid is not closed completely due to interference.
Wash media buildup is preventing the lock bolt from extending.
Machine/motor control detects open door lid switch when attempting to lock.
Machine/motor control cannot determine if door lock is in a locked state.
Check for lock interference with lid or lock bezel