I have an element flx 3710 flat screen tv. It does not have a power button and I lost the remote, how do i turn it on

You can't, there is no enter button. You need a new remote for $27.00. Hide it from your child!

https://www.google.com/search?q=flx+-+1910+remote+replacement

Here is your manual, simple controls only

Element FLX-1910 User Manual - ManualsLib

https://www.manualslib.com > ... > LCD TV > FLX-1910

View and Download Element FLX-1910 user manual online. 19" LCD Television. FLX-1910 lcd tv pdf manual download.

..
..

Your screen might of blew out when it was off

You might have bad capacitors still that you cannot see. The only way to be sure is with an ESR meter. Check all the connections on the boards again to be sure that the sensor for the remote did not come off.

On your TV Remote:

CAPTION Cycles through the Closed Caption:
?? Anlalog Closed Caption:CC1/CC2/
CC3/CC4/TT1/TT2/TT3/TT4/Off
?? Digital Closed Caption:Service1/
Service2/Service3/Service4/Service5/
Service6/Off

This is a protection circuit that prevents the tv from coming on (to stop damage of the components) ....you need to check your voltages off the power supply and make sure they all read well (EX: 24v12v5v etc). Also look for popped capacitors that would make the values lower than need be for the tv to power on properly.


Once you repair the power supply then you may need to replace other components if needed!


Please rate if this helps! :D

checked first the signal from ur cable/antenna it seems you haven't a signal from there that's why u got only a blue screen....

The tv turn on now have power and LED power light indicator is on and solid green?Yes,than it is the main Tuner signal board had a short some where and it is the problems and the causes.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.

ldq781, I think you or electronics technician should investigate the units internal "switch-mode-power-supply/cold cathode-fluorescent lamp electronic ballast circuit(inverter) for "failed" "swollen" electrolytic filter capacitors and or "poor quality" soldering of the electronic components to the copper foil traces of the printed circuit board(power supply board) The first thing to do is visit YOUTUBE for video clips of lcd monitors being repaired for these typical types of "failures" which are most common to both types (monitors and lcd tv's) After you do your research then return here and leave additional reply if you still need help. 12fixlouie

power supply problem of course...set is not dead so line fuse would be good as you said...regulating power supplies are very stable but do contain >>>CAPs<<< caps can leak ,swell do to heat ,etc.
check for visible signs of damage to caps. on circuit board...check regulating transistor( on heat sink)
the >>> on off on off routine<<< makes me think check caps!!!!!

Well okay!
couple of questions?
1) Is a multi remote - does it or can it control other components like a DVD player or a VHS or Cable box?

2) If it does - you may have selected one of these other components to control
NOTE: Try depressing the TV button and then try the other buttons such as channel or volume to see if it's back working.

Blessings,
A/V Guy