Camera my display wont i cant se the shot im taking help

And the battery is still ok? See the LCD display.
When the battery is almost empty, it won't be able to charge the capacitor in the flash, and the flash can't fire. The camera protects the shot, because if the flash was needed, the shot would be much to dark.

Maybe she switched off the display try to found in manual how to switch it on

Please read my blog.

Hi,
If its Sony DSC-T1 camera then its problem of ccd imager and Sony will repair it free of cost.
Click Sony CCD Imager Support for details.

according to the manual..

you need to initialise the camera. you do this by pressing "initialize" on the screen the "initialize all settings" press "ok" this will restore default settings. it wont erase any pictures stored on the memory. though make sure not to power off whilst doing the above.

i hope that helps.

there is a probably a problem with either the screen or the camera itself...
either case take it to a repair shop!

Two things to try, 1) The release button is a two stage process. Pushing the release button 1/2 way allows the camera to focus on the subject. It needs a few milli-seconds to do this. A full depress releases the shutter, but it you don't allow the camera to focus, things get messed up.

2) Holding a camera of this type with outstretched arms is a sure way to get poor shots. I use my Fuji S5000 with the viewfinder rather than the LCD display for framing shots just like I was using an SLR/DSLR

Hi,
Try this:

- Turn off your camera and take the batteries out
- Then take the memory card out
- Leave the batteries out for around 10 minutes
- Then put the memory card back in
- Then put the batteries back in and turn the camera on
- Try to see the pic/watch movie again

If this didn't work, check the memory card with a card reader...if it still gives an error then the card might have malfunctioned or needs a reformat.

Good luck!

Try a reformat of the card. Make sure the card contacts are clean. contact Sony Tech Support Team

LCd may be defective. Takes 4 weeks to get from sony service. Pl.let me know after cleaning the LCD connector for proper contacts.