Some channels are blocked due to V-Guide. How do I unblock without a remote?

With the converter remote control, you can't unblock the TV. To unblock it, you should have the remote control to the TV.
If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

You DON'T! You need to buy either a replacement or get a universal remote from Best Buy.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

Aiwa television comes with the option of blocking certain channels from viewing, allowing you to control which channels people using the television can view. However, if you forget the code that you entered to block the channels, you might find yourself unable to watch those channels. Fortunately, there are a couple of buttons on the television and the remote that you can press to reset the PIN and customer ID numbers, which unblocks the channels.

Turn the television on.

Press the "Volume Down" button on the front of the TV and press the "7" button on the remote at the same time.

Enter in a new PIN code and new customer ID.

You must purchase a LP702 remote. It's a programmers remote. You can find one on ebay or google it for where to buy.

Try this:
On Remote Press Channel Up And Volume Down At The Same Time For 5 Seconds. Then Enter 0000 As Your New Password.

Call the maker of your TV. They have a V Chip reset they can use. Do you live with anyone else? If you do, they might have created a V Chip block on the TV. Wife, Kids, Husband...any problems [email protected]

http://tv.manualsonline.com/manuals/mfg/rca/rca_product_list.html

I solved the problem by holding the v-chip button on the remote controller for like 30 seconds and then a menu appeared and let me choose to stop the v-guide fonction.

The Digital Channels are Blocked and Some of the Annalog Channels are Blocked that you can't access some channels and how do you unblock the channels by getting rid of the Code for Parental control?How Do you get rid of the Parental Code to acess all Channels .