First put the pin in the bottom lug of the watch ( the pins is in the band already). Then take a small flat head screwdriver ( found at Radio Shack, or any electronics store). If youn can, take a small file and file out the inside of the flathead so that it looks like a "U". put it over yhe pin and press down as youslide the pin into the lugs hole on top. If you can't cut the srewdreiver out, just take the flat side of it and press down on the pin and push in accordingly. Without "U" shaping the screwdriver, it may take a few tries. Good Luck!! If you still have problems please let me know!!
76 views
Usually answered in minutes!
×