Speadsream 5200 E240

Modems are now shipped with the Hardware firewall turned on low to block things,and also Telnet..

Turned it off and then it should also all fixed.

there is methods of hacking this unit as well

------------------
Step 1: you have to make sure your IP is set to 192.168.2.2


Step 2: Go to »192.168.2.1/pfwizardj.cgi?code=E···retain=f and set "All Items" under "Profile Configuration Access" click next and choose "Do not require admin login"


Step2: Go to »192.168.2.1/pfwizardj.cgi?code=E···retain=f and do the same thing, except type 192.168.2.2 as your "Constant Profile IP Address".

(if everything went ok, you should now see the new configuration page)

From here, you have to access every configuration page manually.

Here they are:

»192.168.2.1/dhcpcfg.htm - DHCP
»192.168.2.1/ddnscfg.htm - Dynamic DNS (what francoisr wanted)
»192.168.2.1/ipp_config.htm - IP Passthru
»192.168.2.1/updatelocal.htm - Update firmware
»192.168.2.1/ras_config.htm - RAS config
»192.168.2.1/naptcfg.htm - Port forwarding
»192.168.2.1/dmzcfg.htm - DMZ Config
»192.168.2.1/fwcfg.html - Firewall Config
»192.168.2.1/natcfg.htm - NAT/NAPT Configuration
»192.168.2.1/hostcfg.html - Host Configuration
»192.168.2.1/upnpcfg.html - UPNP Configuration
»192.168.2.1/ripcfg.html - RIP Configuration
192.168.2.1/timecfg.htm - Time Server Configuration
»192.168.2.1/fwwizard.htm - Firewall Config Wizard
»192.168.2.1/adscfg.htm - FW Attack Detection System
»192.168.2.1/snoozecfg.htm - Firewall Snooze Control
»192.168.2.1/lansrvscfg.htm - Gateway Server Port Config


hope that helps