I own a kodak easyshare v10003. I have now notice that the lense is dimm whenever i switch it on. Howw can i resolve it? Should i reset it factory default

SOURCE: Kodak Easyshare camera - acting strange and won't turn on

I STRONGLY suggest not trying to pull out the lense with a knife. i did and now its broken ENTIRELY.

kodak sucks.

SOURCE: Easyshare converted all of my jpgs to easyshare files

i'm not sure how to change the default picture program... but i can tell you that you won't lose pictures if the easyshare program is deleted. it's just an extra program to view/edit pics.... the actual pics are located in a generic folder somewhere on your computer. click properties on one of the pics in easyshare, and see where it's located. then just go to that folder through windows....

hope i helped a little, sorry i don't have the solution for the other part

SOURCE: Kodak Easyshare camera turns on and off

Hi, here is whats going on, if your M763 is powering on for 2 secs and the lense opens up then go's right back in, there is a 90% chance you got sand in the unit from say the beach ?

here is a test , when you press the power buttion watch the lense you will notice that the bigger part rotates as it comes out, what you want to do is give it a little help Lightly rotate it abit more just at the point where it normaly stops and go's back in, the cam will prob stay on and work like normal.

now the hard part 2 things to try, a can of AIR from walmarts try to blow out and sand thats around the rings, i did this and have fixed about 20 of these's now, on the others you will need to take it apart and clean the gears and mech of the lense housing then put it all back together.

hope this helps

IST tech

Chris

SOURCE: Kodak Easyshare camera turns on and off

Yes you are. My wife denied that she dropped in the sand but I found a list of photos that she wanted to print on a post-it paper in the cover and it had sand all over the sticky part. Used the pressure air spray to clean the rings and it is back to life. Well It worked but there was some problem during zoom in&out, so I spray the rings while zooming and out and that cleaned it. I hope I don't have to open it to clean the mechanism. Thank you.

SOURCE: My Kodak EasyShare CX7430 is displaying camera

Go HERE to get it repair.