I am unable to connect my Plantronics to my HTC EVO. I charged the headset. Do you have any instructions how to do this. I believe my headset is dead. How can I tell. When I charge it the red light goes on and after a while it goes off. But then I am unable to get any indication that it is working. What are the steps. Thank you.

First, try deleting the K100 out of your phone and, if you can, remove the battery from your phone. Once the phone reboots, try pairing the K100 back up to the phone and see if that resolves the issue.

Good luck from Headsets Direct!

The Plantronics Explorer 232 is compatible with the HTC Inspire. Once you make your phone discoverable, then put the headset into pairing mode by pressing the call control button until it flashes red and blue. Here is a link for the pairing instructions:

Plantronics Explorer 230 Pairing Instructions

Good luck from Headsets Direct!

To pair the Plantronics BackBeat 903 with an EVO 4G:

On the 903 headset:
With the headset powered off, press and hold the "Power/Pairing" button until the LED indicator flashes blue and red. This will put the 903 headset into pairing mode.

Use the iPod Touch menu to search for the headset and select 9xxBackBeat.

(If prompted, enter 0000 for the PIN code/passkey. Some devices also require you to accept the connection. Headset is paired when LED flashes blue.)

On the EVO 4G:

Turn the Bluetooth on from the Home screen, tap Menu, Settings, Wireless & Networks, Bluetooth.

Pair the EVO 4G by going to the Home screen, press Menu, Settings, Wireless & Networks, Bluetooth Settings, Scan for Devices. Follow the on screen prompts to pair the devices.

Good luck from Headsets Direct - 800-914-7996.

Unplug the AC power from the Plantronics 500A base, leave it unplugged at least overnight if possible, no lights should be illuminated on the base. Then plug the power back in, charge the headset, and try re-pairing the headset to the Plantronics 500A base unit. Here is the link for the pairing instructions:

Plantronics Voyager 500A User's Guide

Good luck from Headsets Direct!

Try to re-pair the headset to your phone to make sure that it has a good connection. Before running through the pairing process, be sure to totally delete the headset from the Blackberry's menu. You may want the headset turned off for this process.

Once you make your cell phone discoverable, then put the Plantronics Voyager Pro headset into pairing mode by holding the power button until the headset flashes red and blue. Here is the link below for the Voyager Pro pairing instructions.

Plantronics Voyager Pro Pairing Instructions

Good luck from Headsets Direct!

Once you make your cell phone discoverable, then put the Plantronics Explorer 330 headset into pairing mode by holding the call control button until the headset flashes red and blue. Click on the link below for the Explorer 330 user guide with the pairing instructions.

Plantronics Explorer 330 User's Guide

Good luck from Headsets Direct!

Had the same problem and called Plantronics. They reminded me about putting the earpiece in "Discovery Mode" by holding down the button when turning it on until it flashes blue/red. Then have the EVO scan for bluetooth devices. It found mine right away.

my plantronics will not connect to my htc diamond without being on the charger.when i take the bluetooth off the charger it will not connect

Start with the device off but fully charged. Press and hold the call control button for 8 seconds; at this point, you'll see the light flash blue then red. You'll have two minutes to connect it to your new phone. Use the passkey 0000 after your phone finds the headset.

when i charge my bluetooth, the light is red for a few minutes but it goes out and its not charging anymore. Please help