I CANT SET THE TIME ON MY JVCKD-G510 - Car Audio & Video

huawei g510 is a optional dual sim. normally the phone have only one sim card slot only available. so first check mobile shop where you buy this mobile.

Huawei Ascend G510

See page 20 of this manual: http://resources.jvc.com/Resources/00/00/94/GET0267-001A.pdf

Online manual:
JVCKD-G632

You can download the user manual from the manufacturer's web site at
http://resources.jvc.com/Resources/00/00/94/GET0267-001A.pdf

If you need the installation manual, you can get it at
http://resources.jvc.com/Resources/00/00/94/GET0267-002A.pdf

press the number for 3 second
example, if you want a 104.7 in number 6, press # 6 for 3 second.

hi sir, please try this: please go to the link below and then on the left side of the instructions please click the General Settings-PSM. it'll show you how to set the time. the manual will be helpful for you in the future so i suggest that u can save it.
http://dl.owneriq.net/d/dcf71de7-5dba-489d-b92e-6e935cc5644b.pdf
kindly rate me.. thanks for using fixya..

please, is there anybody who can help me with the setup cd(installation cd) for d-link airplus dwlg510.

1. click on S (select) and choose clock and hold it (?) 2. click on bar v|<< >>|> to select H or M or Seconds 3. adjust it turning the volume button 4. repeat steps 2 and 3 for minutes 5. repeat steps 2 and 3 for seconds

0) You must log as Administrator to enable your device

1) Check if the adapter has been installed

(My computer-->>Right click --Properties--->>Hardware--->>Device Manager---->>Network

2) You have to set the wireless connection

To set one do this:

Connecting XP
Click your Start Button
Select and click Control Panel
Select Network Connections
Select Wireless Network Connections
Right click
Select View Available Wireless Networks
5. Highlight the network you want to connect to
Click Advanced
6. Select the wireless network tab
7. Highlight the network in the available networks window
9. Click configure
9. IN the Properties Window
Double check the SSID (network name)
Enter the WEP KEY provided to you by the office
Click OK

Recheck your connections on the kna-g510 and ensure it is getting power, not too familar with the kvt-819, but I've got the kvt -915 and when I pull up the screen, there is an icon right by the src icon, that looks like a wrench. Press that and find A/V interface and ensure that the navigation input is set to RGB, also you can back out and go to user interface and ensure the Navigation is set to auto intstead of manual. That may be the case if it is similar to the kvt -915.