Hi, heating element gone I assume. It works well but does not heat up anymore.

possible control board

The more resistance the elements have the quicker your water heats up. Resistance creates the heat. If a new element is 7 ohms, it is more likely than not that your elements are not the issue.

This tutorial will show you how to check your Zanussi element and how to replace your Zanussi cooker element.
Here are the 3 main faults to look for in your oven or cooker that is not heating

• Your oven will not work until the clock/timer has been re-set after replacing an oven element or tripping the electrical supply. Consult your Zanussi manual.
• If you're Oven is not getting hot or heating up it could be a faulty element, if the fan in the oven is running and the thermostat light is on, this will lead us to believe that the element has gone faulty. With grills the thermostat light should come on there should be heat, if not then this could be the grill element or the thermostat.
• When you turn the oven on, the household electrical supply trips on the Rcd (this is the earth trip in the fuse board sometimes called the breaker tripping) your fan oven element has gone to earth and needs replacing.

If this helped like us on facebook please

How to Video Tutorials on Domestic Appliances

Hi,
Check your heating element..
A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working
How to Replace the Dishwasher Heating Element
Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and seehow simple it was. thanks Ronnie " - ronnieshomes

Hi,

I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and installed them in minutes...now the thing works like new... However I have also found that if the heating element goes bad then that also can mess things up bad... So I would buy new spray arms, and also check out the heating element to make sure it is working... Here is a tip that will help you with the online buying...

Dishwasher Spray Arms not Spinning

How to Buy Appliance Parts Online

A bad heating element causes many problems in dishwashers...

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

Dishwasher Residue and Film on Dishes

heatman101

Asker's Testimonial "explanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes
/../

Hi,
Check your heating element..

A bad heating element causes many problems in dishwashers…

Dishwasher Problems The Heating Element not Working

Dishwasher Maintenance

heatman101

Asker's Testimonial " explanation very clear. will give it a go and see how simple it was. thanks Ronnie " - ronnieshomes

Heating element or timer has gone out.

Hi,
Is your dryer electric? Assuming so, you're probably right that the heating element has gone out if the drum is turning but there is no heat at all.
I don't know if you are a do-it-yourself type, but if you take the model/make/serial info to your appliance parts store, you can obtain the correct heating element and install it yourself.
I hope this helps... Good luck!

The Breville esp8xl has a wire connector to the heat chamber that can become loose through repeated heat/cool cycles. Opening up the machine, finding this connection, which was loose, blue wire at back of heat chamber, and tightening it fixed my problem.

Bad connection
this wiil cause this make sure to use a Hi Heat connector abnd the connections are tight