At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Since you declined to specify the model of your Uniden cordless phone, I can only direct you to select the type and model from the list beginning here to download a copy of the manual.
If the set was used for a long time it is possible that there is a feedback due to some capacitor leak within the circuit. use a dryer or wash off PCB and all the board to dry before the battery is plugged back . Check if the fault clears or improves, if so repeat.
Since you declined to specify the model of your Uniden DECT system, select it from the list beginning at
http://www.uniden.com/owners-manuals/dect-phones/scat/dectphones_mnl/ to download a copy of the manual.
Since you neglected to specify the model of your Uniden DECT 6.0 phone I can only suggest you select it from the list beginning here to download a copy of the manual and the remote access instructions.
As soon as your message starts, enter 0 and your pin (w/in 2 seconds). Then follow prompts. More specifics, see your telephone manual - you can go to www.retrevo.com/support/uniden-tru8885-2
See pg 64-65 and if you need to set pin, pg 25. Be blessed.
My login didn't get accepted with the above solution. I want to edit that this solution works for my older 2.4GHz base units (models DCT-748 and DCT-7488) - both are about 3 yrs old.
I moved some furniture around after christmas and unplugged the phone to do so. Now it does what yours is doing. It needs to be re-set up as if I just bought it. Is it possible yours was unplugged? Suggest you start from scratch with the set-up manual. Personally, I can't find mine. I have the french and am translating it. I can't believe the nonsense I am going through just because I unplugged the stupid phone. Good luck.
There is a "Tone / Pulse" switch or program setting you want set to "Tone". It would be part of the base unit and not an option on the cordless handsets.
×