I have the didgital S0500 and can't find the instruction booklet. How can I change the entry code and where do I replace the battery Is it possible to get another booklet Thanx

I wrote my research about changing codes and I used info from https://resumecvwriter.com/blog/how-to-write-a-cover-letter to write cover letter. It was great idea so I got high grade.

Not enough information to answer. Can you be more specific and use model numbers?

Instructions , no luck with the recipe booklet :)

http://sandbox.norpro.com/magento/wordpress/wp-content/uploads/2014/07/151-instructions-2013.pdf

The batteries could be too discharged to release the bolt locking mechanism so the key must be used to gain entry to replace the batteries and possibly reset the code.

The dry batteries used in an electronic safe last such a long time they are often forgotten until trouble is experienced. Once accessed it is often discovered one or more of the batteries have leaked and caused corrosion so extensive cleaning and sometimes repairs must be carried out before long life and reliability can be assured.

It is wise to refer to the instruction booklet beforehand.

Good luck!

check the auto booklet if you do not have one go on line and key inn ford windstar keyless entry codes The Ford dealer ship can assist also.

https://www.hunker.com/13419338/instructions-for-an-electronic-digital-safe

How can I program my electronic keypad lock when the instructions with the programming code have been lost?
The back plate of the keypad side of the lock on the exterior of the door has a sticker which includes the serial number, six digit programming code and two pre-programmed four digit user codes. The lock must be disassembled to a point the exterior of the lock can be pulled away from the door and the information on the sticker made note of.
This number is the programming code referenced in the information for changing the entry code.

This link will take you to the page that you need to get started:

http://consumer.schlage.com/Service-Support/Pages/InstructionandManuals.aspx

Then scroll down to this heading on that page:
Electronic Security-Keypad Entry Flex-lock FE595/Keypad Entry Auto-Lock FE575 Documents

There's a wealth of info under that heading. You will be able to see a PDF file of the original print instructions, as well as a video of how to install the lock. This installation video (third item down) will be useful to allow you to disassemble it and view the sticker. This is also a great time to change the 9-volt battery! Batteries should be replace about every three years.
The eighth item under that same header is a video which walks you through how to reprogram the keypad to your new code, using that programming code that you found on the backside of the keypad.
A note about the PDF files: If you cannot view a given file, you need to first install Adobe reader. You can get the free download from here:

http://get.adobe.com/reader/

Good luck--and please provide feedback if this helps!

The remote should have come with a booklet with all possible codes for the various brands and models of TV's. there are probably several codes for GE televisions.The booklet also gives instructions on how to find the correct code. If you do not have the booklet, get back to me with details: model number of your remote and model number of your TV, and I may be able to help.

most electrical stores carry these at around $2.00

Please rate our help to keep the FREE service online++++Thanks for using FIXYA

Mike 2 things are needed to get 2 radios comunicated 1 channel, 2 the Squelch code, if both are the same in each radio (same chaennel and same code Ex. Ch 5 Code 22) the radios must to be comunicated. Press the menu key to change each of this features The Squelch code can be PL or DPL, no matter wich one are you using, just need to be the same.