I am getting static when I answer phone ,all 4 phone do the same .Caller can hear me but I can't hear caller well because of the severe static. Phone has be in use for 4 months without this problem before today. No new wireless devices in use.

Hi anonymous, You've made a wonderfully unintelligible statement. Do you think that you could have another go at it?

there is a problem with you mic , goto youtube for your answer

Hello there,

There are two ways on how you can hear the caller. One is through the earpiece and one is through the phone's speaker.

Are you able to hear the caller but just not clear or with static sound? If yes, then you have a problem with the earpiece of your phone. You can test this by putting it to a speaker phone. If you can hear the caller clearly then you should have your earpiece check. Usually this problem is caused when the earpiece is often moisted or get wet. Try blowing a canned air on the earpiece.

Please let me know how this goes. Thank you for using FIxYa.

Hello,

Found this on the VTECH support site regarding your model:

Tip 1 of 1

Caller ID and Call Waiting ID are subscription services, available from most local telephone service providers. You must subscribe to these services in order for the features to work on your phone. Contact your local telephone service provider for more information.

In addition, your caller must be calling from an area that supports caller ID.

Both you and your caller’s telephone service provider must use compatible caller ID systems.

If you subscribe to DSL service for this telephone line, DSL filters must be plugged into EVERY phone jack that has a phone. The DSL signal can cause caller ID disruption, static, noise and other issues on your line. DSL filters block the high frequency DSL signals from being transmitted to the telephone. If you are not using the DSL filters provided by the telephone company, this will cause static/noise and possibly caller id issues on your phones.

In most cases, we recommend you connect the plug end of the DSL filter into the telephone jack, then connect a telephone cord between the filter and your phone.

Please contact your service provider to obtain DSL filters and installation information.

Caller ID and Call Waiting ID may not be available for every call. Common reasons are incompatibilities between your and your caller’s service, transmission errors and answering calls before the ID data is received.

In addition if you would like to contact them or get more info on your phone, then use this link:

http://www.vtechphones.com/vtechui/support/faq_index.cfm

just need a new earpiece speaker or it simply needs to be adjusted into place. If there is no repair shop around you or you do not want to mess with it, then just buy a $20 bluetooth headset to bypass the whole earpiece.

does anyone out there have a solution for peggy's problem? I have the same problem------Bob

I can not hear caller when phone is answered, but caller can hear me.

Problem is in phone's microphone. Take it to a service center.

Either the handset Rxer or the base Rxer is off frequency

You've got an IP issue somewhere in your setup. It sounds like the call is being lost and then the phone is querying the DNS server to find out where it should be looking for the call. Do you have a VOIP server name or it's IP address in the setup? Are you using DHCP or manually assigning IP addresses? If the VOIP server is not on a static IP, I would fix that first. Post back here the answers and we can look at it further.