Good morning, How do I change the time on my Mitel 4150

Here is a link to the manual. Go to page 34.
http://edocs.mitel.com/UG/EN/2ICP_4150_UG_R2_EN.pdf

The time has to be changed in the programming interface of the phone system itself. You cannot change the time from any set other than a 4150 or a super console 1000. These sets can only be used to change the time on a mitel sx200 or icp. This does not work on the 3300.

Either your on-Site system administrator, or your vendor will have to make the change. This is a system wide setting, not just your phone.

Either your on-Site system administrator, or your vendor will have to make the change. This is a system wide setting, not just your phone. If you are the system admin, then your vendor should be able to help you out with this setup.

Mark

The time and date are programmed through system programming. A 4015 phone cannot do this programming. A 4150 phone setup as a subattendant phone with the "attendant setup time/date" class of service option enabled for the 4150's class of service can change the system time and date. This is accessed through the LCD touch screen keys of the 4150. Scroll through the options in the screen until you find set time /date.
Also an attendant console with the "attendant setup time/date" class of service option enabled for its class of service can change the time and date. Press the function button then choose attendant function.
Choose set time. Enter the time in four digits as in 0800 for 8:00. Choose PM if needed. Choose set.
Choose exit to finish.

Your system must have a voicemail system. And your phone must be call forwarded to the voicemail system.

I was very happy and pleased when I received the manual yesterday in my email. I really needed that for my job at New York Life Ins co., as they use Mitel phones through out the whole office. Now tell me if they sell the face plate cards for the quick dial display.
When we hire new employees, I have to change the names in pencil because I don't have extra cards to use. But it's beginning to wear some from 9 years of careful erasing I had to do.

Thank you for your help.

PS

We do have a contract with Mitel. When we have a problem, they are called to the offfice right away. And the service is excellent!

Sincerely,

Mary Turner

Mary Turner

Need to log into phone system or if the 4150 is a sub att. you go through the softkeys.

This phone is a digital phone and requires connection to a digital system commonly called a "key system". If you have removed it from where it was connected and tried to use it at home or somewhere else it will not work. Most home or normal phone jacks are connected to your local provider directly and is what is called an analog system. The 2 are NOT compatable without an interface device. If it is connected to a key system then thier is a problem with the port on the Mitel keysystem that goes to the jack you are plugging the phone into and you will need a technician to fix/rewire this onsite. Hope this helps you. A manual for your phone can be gotton here: http://www.octelephone.com/4150user.pdf

we wants message reset up